Automatic Lead Free Soldering Machine Inline Computer Control Wave Soldering Machine HXT-S3645DZ For DIP Assembly Line PCB 450mm with CE certificate Preheating Length 2000mm
DescriptionWave soldering machine, mainly used for electronic products plug-in
welding, especially for through-hole printed circuit board
(PCB-RRB- welding. This welder uses molten solders (lead-tin
alloys) to form solder peaks that allow preloaded components to
pass through the PCB, to realize the soft soldering of mechanical
and electrical connection between the soldering end or the pin and
the PCB pad. The working principle of wave soldering machine is that the molten
solders are sprayed into the required solder wave by electric or
electromagnetic pump, or formed by injecting nitrogen into the
solder pool. When a PCB with components passes through this solder
crest, the welding process is completed. Application Industry LED industry: Used for welding LED pin and bottom of copper base. Electronic products industry: such as small switches, capacitors,
printing motherboard, resistors, relays, connectors and so on Machinery parts: such as automobiles, motorcycles, ships, planes,
satellites and so on. Consumer goods such as toys, musical instruments, batteries, etc. . Such as LSI, IC, CSP, BGA, mixed IC, etc. . Optical products such as cameras, webcams, and so on. Electrical products: such as television, washing machine, radio,
car navigation system and so on.
Product SpecificationModels | S3645DZ | Configuration | Computer control | Heavy Claw | Four sections of hot air heating | Double wave | Automatic suction flux | Automatic cleaning of titanium claws | Electric tin stove in and out | Spray oscillation: Stepper motor | Number of crests | 2 crests | Across the board width | 30-450mm | Tin furnace capacity | 450KG | Preheat length | 2000mm (four temperature zone, independent control, hot air circulation) | Peak height | 12mm | The over-board component foot is long | 10mm | PCB board transportation height | 750±20mm | Control style | Computer | Rack size | 3600*1500*1650mm | Shape and size | 4500*1500*1750mm | PCB board transportation speed | 0-1.2m/min | Preheat zone temperature | Room temperature-180 °C | Tin oven temperature | Room temperature-300 °C | Direction of Transport | Left → Right | Temperature Control Mode | PID+SSR | Whole Machine Control Mode | Computer Control | Flux capacity | Max 5.2L | Spray method | Stepper Motor + ST-6 nozzle | Total power | 22KW | Operating Power | 6-10KW | Power Supply | 380V 50HZ with 3-phase and 5-wire | Air Source | 4-7KG/CM2 12.5L/Min | Weight | 1.8T |
Applications:Widely used in electronics manufacturing, consumer electronics,
automobile electronics, communications equipment, aerospace,
medical equipment, LED lamps, computers and peripherals, smart
home, smart logistics, miniature and high power ratio electronic
devices.
|