Dry Copper Wire Recycling Machine for Scrap Metal Shredding

Scrap copper wire granulators and separators are equipment used to crush, separate and granulate waste wires and cables, with the main purpose of recovering copper and other valuable materials from them. Scrap copper wire granulators can crush, screen and granulate waste wires and cables to obtain the waste wires and cables. The waste wires and cables are first sent to the crusher for crushing, then the copper and other impurities are separated by screening equipment, and finally the copper is granulated by granulating equipment.

Main functions and uses of scrap copper wire recycling machine:
● Crushing and separation: The scrap copper wire recycling machine effectively separates the copper from impurities such as plastic wire skin in waste wires and cables through a series of complex physical processes for recycling.
● Improve resource utilization: This type of equipment is of great significance in the field of resource recovery and environmental protection, and can effectively utilize the copper resources in scrap copper wire while reducing environmental pollution.

The process of recycling waste copper by the waste copper wire recycling machine:
1. Collection and preliminary classification:
● Waste copper wire usually comes from various waste wires and cables, electronic equipment, etc. These waste copper wires will be collected, and preliminary classification and cleaning will be carried out to remove obvious impurities and non-metallic parts.
2. Crushing and shearing:
● The waste copper wire after preliminary classification will be sent to the crusher or shearing machine for crushing or shearing, and it will be cut into smaller sections or particles for subsequent separation and processing.
3. Separation and purification:
● The crushed waste copper wire will pass through a series of separation equipment, such as airflow specific gravity separator, electrostatic separator, etc., to separate copper from other impurities (such as plastic, rubber, etc.) by physical or chemical methods. The separated copper will undergo further purification to improve its purity.
4. Smelting and casting:
● The purified waste copper will be sent to the smelting furnace for smelting to melt it into liquid copper. The liquid copper is then poured into molds for casting to form copper ingots or billets of various shapes.