Highly Efficient Super Thin Cable Saw Machine Multi Wire Saw 0-35m/Min
|
Detailed Product Description
|
Product Introduction
Product Parameters
How is the flatness of the slabs cut by a wire saw, and is there a need for calibration? The flatness of the slabs processed by a wire saw fully meets the requirements, and normally, slabs cut to completion do not need calibration, except in cases of malfunction that require special treatment. On a slab surface of 2000x3000mm, the flatness is ≤0.2mm. Generally speaking, for example, if a slab needs to have a final polished thickness of 18mm, it is only necessary to reserve 0.3mm for polishing and cut the slab at 18.3mm. After polishing, the slab will have the required thickness of 18mm. If you want to be more conservative, you can reserve a bit more, like 0.5mm.
|
||||||||||||||||||||||||||||||
| Product Tags: Super Thin cable saw machine Highly Efficient multi wire saw 35m/Min multi wire saw |
Related Products
|
Multi-Wire Block Cutting Machine Thin Wire Saw Stone Cutting With Motor For Marble |
|
Pinhe G2034S 0.55mm Diamond Wire Saw for Marble Block Cutting |
|
New - Generation Super Thin Multi Wire Diamond Wire Saw Stone Block Cutting Machine for Stone Processing |
|
Diameter 0.4mm 0.5mm 0.6mm Multi Wire Saw Machine For Marble Slabs Cutting Super Thin |
|
Heavy Duty Super Thin Multi Wire Saw For Marble Block Cutting Machine |
|
High Output Block Cutting Diamond Wire Saw Machine Super Thin |
Email to this supplier