AT-362MC2 Dual-Spindle Hard-Rail Precision Lathe | Machine tool technical parameter table: | | | | | Content | Units | AT-362MC2 | | Turret | Turret specifications | Model | Radial cutter | | Power turret | | Turret type/Number of tools | pcs | BMT65-12T | | Travel | Maximum rotation diameter of the
hod | mm | 700 | | Two centroid distance | mm | / | | MAX. Processing length | mm | 1500 | | Maximum machining diameter | mm | 380 | | Bar processing diameter | mm | 75(92) | System
configuration | FANUC | OI-TF | / | | Power tools motor | KW | 3.7 | | Spindle | Oil pressure | Inch | 10(12) | | Nose end | Type | A2-8 | | Through hole diameter | mm | 92(106) | | Bearing type | Type | NN3026(3028) | | Bearing diameter | mm | 130(1400 | | Spindle motor | KW | 11-15(guangyu) | | Spindle speed | rpm | 3000(2500) | Secondary
spindle | Oilpressure | Inch | 6寸 | | Nose end | Type | A2-5 | | Through hole diameter | mm | 45 | | Spindle motor | KW | 7.5-11 | | Spindle speed | rpm | 4500 | | X-axis | Travel | mm | 230 | | Speed | m/min | 20 | | Servo motor | Kw | 3.0 | | Screw | mm | R32/P10 | | Repeatability | | 0.002 | | Z-axis | Travel | mm | 1500 | | Speed | m/min | 20 | | Servo motor | Kw | 3.0 | | Screw | mm | R40/P10 | | Repeatability | mm | 0.008 | | Y-axis | Travel | mm | / | | Speed | m/min | / | | Servo motor | Kw | / | | Screw | mm | / | | Repeatability | mm | / | | B-axis | Travel | mm | 1500 | | Speed | m/min | 15 | | Servo motor | Kw | / | | Screw | mm | R40/10 | | Repeatability | mm | ±0.005 | | Tail seat | Control mode | Type | / | | Mandrel outer diameter | mm | / | | Morse taper | Type | / | | Track | Type | Hard track | | Track | Type | Hard track | | Track | Type | / | | Water tank capacity | Liter | 360 | | Mechanical size | Floor area | cm | 405x177 | | Mechanical weight | kg | 7200 | | Packing size | cm | 455×230x228 |
The AT-362MC2 is an advanced dual - spindle lathe, designed to
enhance productivity and precision in metal machining. Combining
high - end components and intelligent control systems, it meets the
diverse needs of modern manufacturing. - Dual Spindles: The main spindle, powered by an 11 - 15 kW motor, reaches speeds
of 3000 (2500) rpm. The secondary spindle, driven by a 7.5 - 11 kW
motor, spins at 4500 rpm. This setup allows for concurrent
machining, doubling productivity.
- Power Turret: Equipped with a BMT55 - 12T radial cutter power turret, it
provides 12 tool positions, enabling a wide range of machining
operations.
- Travel: The bed allows a maximum rotation diameter of 700 mm. With a Z -
axis processing length of 1500 mm, it can handle long - shaft
workpieces. The maximum machining diameter is 380 mm, and bar
processing diameters range from 75 to 92 mm.
- Axes: The X - axis travels 230 mm at 20 m/min with a repeatability of
0.002 mm. The Z - axis travels 1500 mm at 20 m/min, with a
repeatability of 0.008 mm. The B - axis travels 1500 mm at 15
m/min, with a repeatability of ±0.005 mm.
- Spindle: High - quality bearings (NN3026(3028)) ensure smooth and accurate
spindle operation.
- System: Adopts the reliable FANUC 0I - TF system.
- Tracks: Hard tracks on relevant axes enhance stability during machining.
- Manufacture engine shafts, transmission gears, and axles with high
precision and efficiency.
- Machine critical components like turbine shafts, compressor blades,
and landing - gear parts.
- Create long - shaft components for oil and gas pipelines, as well
as parts for wind turbines and generators.
|
