AT-361MC2 Dual-Spindle Hard-Rail High-Efficiency Composite Lathe | Machine tool technical parameter table: | | | | | Content | Units | AT-361MC2 | | Turret | Turret specifications | Model | TCSM | | Power turret | | Turret type/Number of tools | pcs | BMT65-12T | | Travel | Maximum rotation diameter of the
hod | mm | 700 | | Two centroid distance | mm | | | ZProcessing length | mm | 1100 | | Maximum machining diameter | mm | 380 | | Bar processing diameter | mm | 75(92) | System
configuration | FANUC | OI-TF | | | Power tools motor | KW | 3.7 | | Spindle | Oil pressure | Inch | 10(12) | | Nose end | Type | A2-8 | | Through hole diameter | mm | 92(106) | | Bearing type | Type | NN3026(3028) | | Bearing diameter | mm | 130(140) | | Spindle motor | KW | 11-15(guangyu) | | Spindle speed | rpm | 3000(2500) | Secondary
spindle | Oilpressure | Inch | 6寸 | | Nose end | Type | A2-5 | | Through hole diameter | mm | 45 | | Spindle motor | KW | 7.5--11 | | Spindle speed | rpm | 4500 | | X-axis | Travel | mm | 230 | | Speed | m/min | 20 | | Servo motor | Kw | 3.0 | | Screw | mm | R32/10 | | Repeatability | | 0.003 | | Z-axis | Travel | mm | 1100 | | Speed | m/min | 20 | | Servo motor | Kw | 3.0 | | Screw | mm | R40/10 | | Repeatability | mm | 0.007 | | Y-axis | Travel | mm | | | Speed | m/min | / | | Servo motor | Kw | | | Screw | mm | | | Repeatability | mm | | | B-axis | Travel | mm | 1100 | | Speed | m/min | 15 | | Servo motor | Kw | 3 | | Screw | mm | R40/10 | | Repeatability | mm | ±0.005 | | Tail seat | Control mode | Type | | | Mandrel outer diameter | mm | | | Morse taper | Type | / | | X Track | Type | Hard track | | Y Track | Type | Hard track | | Z Track | Type | | | Water tank capacity | Liter | 300 |
Mechanical size | Floor area | cm | 355x177 | | Mechanica weight | kg | 6900 | | Packing size | cm | 400x230×228 |
AT-361MC2 Dual - Spindle Hard - Rail Lathe1. Product IntroductionThe AT - 361MC2 is an advanced dual - spindle lathe featuring hard
rails. Engineered to boost productivity and precision, it caters to
diverse industrial machining needs. 2. Product FeaturesMachining Capacity- Dual Spindles: The main spindle, powered by an 11 - 15kW wide - range motor,
rotates at up to 3000 (2500) rpm. The secondary spindle, with a 7.5
- 11kW motor, reaches 4500 rpm. This setup enables concurrent
machining, significantly cutting production time.
- Turret: Equipped with a BMT55 - 12T power turret of TCSM model, it offers
flexibility in tooling for various machining operations.
- Travel: The lathe can handle a maximum rotation diameter of 700mm. With a
Z - axis processing length of 1100mm, it’s well - suited for long -
shaft workpieces. The maximum machining diameter is 380mm, and bar
processing diameters range from 75 to 92mm.
Precision- Axes: The X - axis travels 230mm with a speed of 20m/min and
repeatability of 0.003mm. The Z - axis, with a travel of 1100mm at
20m/min, has a repeatability of 0.007mm. The B - axis travels
1100mm at 15m/min with a repeatability of ±0.005mm.
- Spindle: High - quality bearings ensure smooth and accurate spindle
operation.
Configuration- System: Adopts the reliable FANUC 0I - TF system.
- Tracks: Hard rails on X, Z, and likely other relevant axes enhance
stability and load - bearing capacity during machining.
3. Product ApplicationsAutomotive Industry- Manufacture engine shafts, transmission components, and axles with
high precision and efficiency.
Aerospace Sector- Produce parts like turbine shafts and landing - gear components
that require tight tolerances.
Energy Equipment Manufacturing- Create long - shaft components for power generation equipment, such
as wind turbines and generators.
|
