Water Hardness Calcium Ion Selective Electrode ISE Sensor With EP Housing
|
Water Hardness Calcium Ion Electrode ISE Sensor
>>Technical Parameter Measurement Range: 1 M to 5×10⁻⁶ M (40,000 ppm to 0.02 ppm) pH Range: 2.5–11 pH Temperature Range: 0–50°C Pressure Resistance: Not pressure-resistant Temperature Sensor: None Housing Material: Epoxy (EP) Membrane Resistance: 1–4 MΩ Connection Thread: PG13.5 Cable Length: 5 m (or customizable) Cable Connector: Pin, BNC, or customizable
>>Overview The ion-selective electrode (ISE), also known as a membrane electrode, is an electrode with a sensitive membrane that generates a membrane potential based on ion exchange or diffusion. It primarily consists of an ion-selective membrane, an internal reference electrode (typically Ag/AgCl), and an internal reference solution (composed of chloride and strong electrolyte solutions of the target ion). The ISE measures the electrical potential of a specific ion in a solution, which is determined relative to a reference electrode with a constant potential. The potential difference between the two electrodes depends on the activity of the specific ion in the solution. This activity is related to the ion’s concentration, enabling quantitative analysis.
>>Feature
>>Pre-Measurement Preparation
>>Calibration (Slope Determination)
>>Troubleshooting If the slope deviates from the specified range:
>>Storage
|
Product Tags: EP Housing ISE Sensor EP Housing Calcium Ion Selective Electrode Water Hardness Calcium Ion Selective Electrode |
![]() |
Waterproofing Nitrate Nitrogen Ion Selective Sensor With POM Housing |
![]() |
Pollution Free Digital Ammonia Nitrogen Sensor With Potassium Ion Compensation |
![]() |
Digital Potassium Ion Sensor For Hydroponics RS-485 Output MODBUS Supported |
![]() |
Digital Hardness Calcium Ion Sensor For Drinking Water High Precision |
![]() |
9-36VDC Chloride Ion Sensor Modbus RS485 Digital Cl- Sensor With PP Housing |
![]() |
Fluoride Ion Selective Electrode Digital RS485 Output ISE Water Quality Sensor |