Online Water Quality Phosphate Analyzer
>>Application
With the increasing standards of power plants and the requirements
of desalination and water purification projects, the timeliness and
accuracy of phosphate monitoring have significantly improved.
Particularly, the widespread adoption of low-phosphorus treatment
technology has made the measurement accuracy of low-concentration
phosphate even more critical. The AG9282C Phosphate Analyzer
developed by our company utilizes a photometric dosing method, cold
light source spectrophotometric measurement, and a dead-volume-free
reaction cell, ensuring precise and reliable instrument
performance.
>>Features
▪ Photometric dosing method enables precise reagent measurement.
▪ Cold light source spectrophotometry extends the lifespan of the light source.
▪ Automatic light intensity adjustment ensures measurement accuracy even after light source attenuation.
▪ Large-capacity memory stores measurement data for up to 5 years.
▪ 7-inch touchscreen color LCD offers intuitive operation and display.
▪ 4 isolated current outputs configurable for any channel, range, or PID.
▪ 4 relay outputs programmable for over-limit alarms, sample-loss alarms, or system
fault alarms.
▪ RS485 interface supports remote data monitoring.
▪ Historical data and trend curves accessible for any specified time period.
>>Technical Parameter
Specification | Detail |
Measurement range | 0-50mg / L OEM |
Instrument display value error | ±1%F.S |
Repeatability | ≤1% |
Measurement period | minimum of 20 min |
Stability | Baseline drift:Use a blank calibration without compromising
accuracy |
Chemical drift:not more than 1% reading / month (depending on
reagent stability) |
Type of reagents | 1 kinds |
Temperature Sensor | PT 100 |
Temperature measurement range | (0.0~60.0) ℃ |
Temperature measurement accuracy | ± 0.5℃ |
Temperature compensation range | (0.1~60.0) ℃ |
Isolate the output signal and load | 4 ~ 20 mA (RL <500 Ω) |
Alarm contact capacity | normally open contact AC220V / 3A, DC24V / 5A |
Working conditions | Temperature:0~45℃ Humidity: ≤85% |
Sample conditions | Flow rate:100-300 mL/min Temperature:(5~50)℃ Pressure:14 KPa |
Permissible solid composition of water sample | ≤ 5 microns (no glue is allowed, no grease) |
Power supply | AC220V± 10% 50Hz±0.5Hz power: 150W |
Instrument external dimensions | height, 720, width, 460, depth, 360 (mm) |
Instrument opening size | 665x410mm |
>>Dimension
