Thermal Conductivity Electronic Potting Silicone Liquid Two Component Custom
|
|
Low Viscosity 1:1 Thermal Conductivity Potting Glue Two-Component Silicone Potting Compound for Electronic Components Circuit Board Connector
Features of RTV Silicone Potting Compound:
Product description of RTV Silicone Potting Compound
HN-8806, two-component addition type silicone potting rubber which can be cured into high-performance elastomer by room temperature or heating.
Technical Parameters of of RTV Silicone Potting Compound:
* UV-94 Fire retardant: After two times 10s burn tests on a 3mm-thick sample, the flame was extinguished within 30s, and no burnt fell. [1] * Noted: The data after curing are all measured after the silicone is completely cured. Application of RTV silicone potting compound
HOW TO USE of RTV Silicone Potting Compound 1. When used, weigh A and B according to proportion and then mix them evenly. Mix thoroughly and evenly with a clean stirring device in a clean container, and then potting can be done. It can also be sealed under a vacuum after removing the bubbles. 2. The surface of the potting element needs to be cleaned. If the potting product is too large, it is recommended to potting in stages and then cure at room temperature (4-12hr) or by heating (80ºC-0.5hr). 3. For the automatic potting production line, in order to ensure accurate mixing ratio of A and B, Part A and Part B should be vacuumed respectively to remove the bubbles (the foaming time is 5-10 minutes), and then A and B should be pumped to the static mixer in proportion with a metering pump, and then potting can be done after mixing evenly.
- Storage and transportation: This product is non-toxic non-dangerous goods, according to the general chemical handling, stored in a cool & dry place (room temperature). - Shelf Life: 6 months, overdue please reinspect; If it meets the standard, it can still be used. About us
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Product Tags: Thermal Conductivity electronic potting silicone electronic potting silicone Liquid Electronic two component silicone rubber | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
High Thermal Conductivity Silicone Potting Compound For Heat Dissipation |
|
|
Two Component Silicone Potting Compound For New Energy Vehicle Battery Systems |
|
|
Silicone Potting Compound For Electronic Components Protection And Insulation |
|
|
HN-8806A/B Two-Component Silicone Potting Compound, available in white/grey/black, with 0.76 w/m.k thermal conductivity, ideal for electronic component protection. |
|
|
Electronic Potting Silicone 10:1 RTV Potting Liquid Silicone Gel For Electronics Led Light Driver Clear Silicone |
|
|
10:1 Silicone Potting Compound Silicone Encapsulant Two-Part Silicone Potting Gel For Led Light Inverter Automotive Sensors |
