Weather Resistant 120kn Fiberglass Geogrid For Civil Engineering Soil Reinforcement Solution

Fiberglass geogrid is an excellent geosynthetic material made of high-quality reinforced alkali-free glass fiber yarn used for road reinforcement, old road reinforcement, roadbed and soft soil foundation reinforcement. It has become an irreplaceable material in the application of treating reflective cracks on asphalt pavement. This product is a semi-rigid product made of high-strength alkali-free glass fiber as a mesh base material through international warp knitting technology and surface-coated. It has high tensile strength and low elongation in both warp and weft directions, and has
excellent properties such as high temperature resistance, low cold resistance, aging resistance, and corrosion resistance.

Maintenance requirements and precautions

1. Maintenance during the construction phase

• Base treatment: Before laying, the base needs to be thoroughly cleaned to ensure that there are no sharp objects, oil stains and loose particles to prevent damage to the grille or bonding failure.
• Laying specifications:
• When using the self-adhesive method, it is necessary to ensure that the adhesive surface fits tightly, and the overlap width is 75-150mm vertically and 25-50mm horizontally to avoid wrinkles or twists.
• When using the anchoring method, it is necessary to avoid nailing the nails directly into the glass fiber layer to prevent fiber breakage.
• Timely covering: After laying, the asphalt mixture or filler should be covered as soon as possible to reduce the aging of the adhesive layer caused by direct exposure to ultraviolet rays.

2. Maintenance during the use phase

• Regular inspection: Focus on monitoring whether there is debonding or local damage in the joints and edge areas, and repair them in time to prevent cracks from expanding.
• Chemical pollution protection: If used in chemical areas, it is necessary to regularly remove surface oil or corrosive substances to avoid long-term infiltration affecting the performance of the coating.

Key measures to extend durability

1. Model selection optimization

• Select the corresponding tensile strength (such as 20-120KN/m) and mesh size (preferably 0.5-1 times the maximum particle size of asphalt aggregate) according to project requirements to ensure the interlocking effect.

2. Environmental adaptation design

• Anti-UV coating models are selected in high-ultraviolet areas; drainage design is strengthened in rainy and humid areas to reduce water damage.

3. Composite technology application

• Combine geotextile or steel-plastic grid to form a composite structure to improve impact resistance and fatigue resistance, suitable for heavy-load traffic sections.

YIXING SHENZHOU Geosynthetics make infrastructure more sustainable. They extend the service life of roads, reduce the use of aggregates, conserve and protect water, minimize land disturbance and control soil erosion.

Sustainability is at the heart of what we do.