Drilling Waste Management System
Drilling Waste Management system can be refered as DWM (Drilling Waste Management), it is highly vital part of oil&gas drilling.Solids control is a
technique used for well drilling to provide prepared drilling
fluids for drilling rigs. Drilling waste management system is used for taking drilling fluids from the
drilling cuttings and clean the fluids for resuse.
Drilling Waste Managemnet is to maximize the recycling of drilling
fluids,and minimize the drilling waste in order to save cost for
operators. There are two ways to recovery drilling cuttings,but
their purpose is the same.
Drilling waste management system mainly including cutting dryer(
vertical centrifuge), horizontal decanter centrifuge, transfer
pump,etc
S/N | S/N | Description |
1 | Vertical Cuttings Dryer | TRCD930 with option for VFD or fixed speed |
2 | Decanter Centrifuge | TRGLW355Centrifuge 14inch bowl,Optional model as below:
TRGLW355 Centrifuge with VFD drive.
TRGLW355 standard with fixed speed |
3 | Screw Pump | Two sets TRG30A-075 Screw Pump with capacity:30m³/h for each pump.
One for taking fluids from catching tank to feed the decanter
centrifuge,the other for flushing the Vertical dryer. |
4 | Skid with catching tank | Fast move skid for mounting all the equipment
One Catching tank with capacity:4m³ for catching fluid from
vertical cuttings dryer. |
5 | Telescopic Skid | Two telescopic skid with walkways and handrails for safe operation.
One for mounting the decanter centrifuge to a higher position in
order to allow the centrifuge discharged fluids feed to active mud
system by gravity.
The other telescopic skid for mounting and adjusting the height of
the vertical cutting dryer to allow the discharge of drying
cuttings |
6 | Electric Cradle | 0.5 Tons electric cradle for lifting the components of vertical
dryer |
7 | Electric Control System | Two lighting system,electrical control boxes and cables and plugs
for operation the complete system. |
1. Screw conveyor or vacuum transfer pump to feed material to vertical
cutting dryer.
2.Vertical cutting dryer handle the oil based mud to less than 5%
OOC(oil on cuttings),cuttings are discharged, oil are recycled.
3. Decanter centrifuge recover the useful drilling fluids from the
mud.
4.TR Solids Control is the professional API certified solids control and drilling waste management system including complete
equipment manufacturer in China.
Drilling Waste Management system is vital for maintaining the quality of drilling fluids in the oil
drilling. TR Solids Control specialize in providing high-quality Drilling Waste Management system and delivering reliable and efficient solutions.
