The HF - 918B1 medical - specific equipment is designed for the
production of medical textile accessories, combining rich
configurations with diverse process solutions to meet different
production needs.
The operating width is 918mm. There are options of 15 needles (540
needle positions), 18 needles (630 needle positions), 20 needles
(720 needle positions) and 24 needles (840 needle positions). The
number of weft yarn bars is 3. For power, the main drive motor is a
3.8KW servo motor, and the take - up, rubber thread feeding and
spandex motors are each 0.75KW servo motors. It is also equipped
with 1 set each of single - layer elastic rubber thread conveyor,
rear weft elastic rubber thread stable conveyor, single - roller
glue roll tape - falling frame, and a set of three - color
indicator lights for indicating normal startup, yarn breakage and
shutdown status. The working voltage is 220V, the speed ranges from
0 - 2000 revolutions per minute, the net weight is 650KG, and the
dimensions are 2M × 1.05M × 2.15M.
- Strong Adaptability: It can produce 5 pieces of 140mm - wide webbing simultaneously
and support multi - needle production from 15 - 24 needles.
- Process Selection: Choose the large bobbin solution for low - cost and space -
saving; choose the large yarn stand solution to reduce equipment
investment; choose the small bobbin solution for small - batch and
flexible production.
- Medical Scenarios: The large bobbin solution more is suitable for the production of
medical webbing with high - stability requirements due to its low
manual intervention and low loss rate. Overall, the HF - 918B1
provides a comprehensive and flexible solution for the production
of medical textile accessories.
