Overview
1SFA896111R7000 is a softstarter. It has a rated maximum
operational current of 45A with an operating voltage span from 208
to 600VAC. The rated control voltage is between 100 to 240VAC at
50/60Hz. PSR features a two-phase control soft start and stops
through a voltage ramp. It has a built-in bypass for easy
installation and energy saving. A RUN and a TOR signal are
available from a relay output in NO (normally open state). The
start/stop ramp and time are easy to set by three potentiometers on
the front. PSR is often used in combination with a manual motor
starter (MMS) from ABB, so mechanical connection kits are
available. Another popular option is Fieldbus communication, which
can be enabled by an external adaptor and a Fieldbus plug. The PSR
range is our most compact soft starters with basic functionality
and values. Common applications are, for example, pumps, fans,
compressors, and conveyors. Key Attributes - Rated operational voltage from 208 to 600VAC
- 100 to 240VAC rated control supply voltage (Us), 24VDC rated
control circuit voltage (Uc)
- 50/60Hz main circuit 50/60Hz rated frequency, 45A rated operational
current - In-line connection
- (230V) 11KW, (400V) 22KW, (500V) 30KW rated operational power -
In-line connection
- 100% service factor percentage, 4xIe for 6s starting capacity at
maximum rated current Ie
- 0 to 20second [unit of time], 1 to 10second [unit of time] ramp
time
- Run signal relay, by-pass signal relay, screw terminals
- Acc. to IEC 60529, IEC 60947-1, EN 60529 main terminals IP10 degree
of protection
- Dimension is 153 x 187 x 54mm (W x H x D)
- Ambient temperature range from -25 to +60°C
More Products In Stock: | DCP02 | DCP10 | DI685 | | DI801 3BSE020508R1 | ACSM1-04AS-012A-4 | 5PP520.1505-00 | | 4PP420:0571-C35 | DLM01 | DLM02 | | DO630 3BHT300007R1 | DO801 3BSE020510R1 | 1SFA896111R7000 | | DO818 | DO910 | DO930 |
|
