Single Insulated Wire And Cable Fire Resistance Tester IEC 60332-1-2

IEC 60332-1-2 Single Insulated Wire And Cable Vertical Combustion Tester

Single Wire And Cable Vertical Combustion Tester Production introduction:

The single wire and cable vertical combustion tester is mainly used to detect the flame retardant properties of the insulating materials of wires and cables under abnormal working conditions (such as overheating, overload or short circuit). The equipment strictly simulates the flame spread of the cable when it is laid vertically. It can accurately evaluate the speed of the flame spreading along the longitudinal direction of the sample and simultaneously observe the ignition effect of the molten dripping during the combustion process. The combustion box door must be kept open during the test (Note: The box door is designed only for equipment protection and daily dust prevention. According to the requirements of the standard test procedures, it must be opened during the experiment to ensure air circulation and observation field). This device complies with international general flame retardant test standards and is widely used in the verification of fire safety performance of power cables, communication cables and optical fiber composite cables.
 

Single Wire And Cable Vertical Combustion Tester Standards:

1. IEC 60332-1-1
- Name: Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable
- Scope: Vertical flame test for a single wire or cable (flame height 20mm).

2. IEC 60332-1-2
- Name: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
- Scope: Vertical flame test using 1kW pre-mixed flame (flame height 125mm).

3. IEC 60332-1-3
- Name: *Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles*
- Scope: Additional test for evaluating molten droplets during combustion.

International and regional equivalent standards

European standards (EN)

4. EN 60332-1-1/1-2/1-3

- Completely equivalent to IEC standards, applicable to EU CE certification (such as CPR regulations) and UKCA certification.

US standards

5. UL 1581

- Section VW-1: Vertical burning test (similar to IEC 60332-1-2, but the flame intensity and judgment criteria are different).

6. UL 2556

- References the IEC 60332 series and is applicable to flame propagation testing of wires and cables.

7. NFPA 262 (ASTM E662)

- Optical cable burning test (some methods are complementary to IEC 60332).

Chinese Standard (GB/T)

8. GB/T 18380.11-2022
- Equivalent to IEC 60332-1-1 (single vertical burning, 20mm flame).

9. GB/T 18380.12-2022
- Equivalent to IEC 60332-1-2 (1kW flame vertical burning).

Japanese Standard (JIS)

10. JIS C 3005
- References IEC 60332-1 series for fire performance testing of wires and cables.

Canadian Standard

11. CSA C22.2 No. 0.6
- Vertical burning test requirements, similar to UL VW-1.

Australian/New Zealand Standard

12. AS/NZS IEC 60332.1.1/1.2
- Directly adopts IEC standards, applicable to the Australian and New Zealand markets.

International Railway Standards

13. EN 45545-2 (Railway)
- References the IEC 60332 series of tests for the fire performance of cables.

Single Wire And Cable Vertical Combustion Tester Specifications:

Single Wire And Cable Vertical Combustion Tester Technical Parameters:

● SUS304 stainless steel control box, fume hood, and metal cover are integrated for easy operation and beautiful appearance;
● Metal cover size: 300mm×450mm×1200mm, open on the front, closed on the top and bottom;
● Blowtorch: nominal power is 1kw;
● Control mode: touch screen control, the test burning time is set on the screen, and the burning time can be controlled and the temperature value can be displayed during flame temperature calibration;
● Ignition device: automatic high-pressure ignition;
● Flowmeter: air rotor flowmeter adjustable from 1.5 to 15L/min, propane rotor flowmeter adjustable from 0.1 to 1L/min;
● A separately controlled exhaust fan is installed on the top;
● Flame detection device: one φ0.5K imported thermocouple, one electrolytic copper block with an outer diameter of φ9mm and a mass of 10g±0.05g, and a set of temperature and time display devices.