ASTM D1230 45 Degree Flammability Testing Equipment For Textiles

ASTM D1230 45 Degree Flammability Testing Equipment Textile Fabric Flame Test Chamber

Product introduction:

The 45-degree flammability tester is used to determine the flammability of textiles for clothing. It measures the intensity and speed of burning of flammable textiles once ignited when worn. It can also test the damaged area and damaged length of textile fabrics at 45° and the number of times they are exposed to flames when heated and melted to a specified length.

Compliant standards:

ASTM D 1230 FTMS 191-5908 CFR 16 Part 1610, CALIF TB 117 NFPA 702 GB/T 14644

Test principle:

Burning intensity and speed test
Under specified conditions, place the sample at a 45° angle, ignite the sample for 1 second, and use the time required for the sample to burn a certain distance upward with flame as a measure to assess the burning intensity of the textile. For fabrics with raised surfaces, the ignition or melting of the base fabric is used as an additional indicator of burning intensity.

Feature:

• All stainless steel box, beautiful, corrosion-resistant, and easy to clean;
• Lightweight structure, easy to move;
• Imported needle valve adjusts the flame height to 16mm.
• Imported brand pressure gauge and pressure regulating valve, can display gas pressure.
• Heat-resistant glass door makes it easy to observe the internal test status.
• Provide a power switch to cut off the power.
• Timer automatically counts, resolution 0.1s; has timing reminder function;
• Start switch to start the test; automatic timing of the afterburning time;
• Micro switch automatically records the end time of the test;
• Instrument control system; the test is more automated.
• The burning rate is automatically calculated and stored.
• Equipped with a standard customized brush device, all stainless steel material, the brush applies 150g pressure to the sample;
• Each brush cluster has 20 pieces, a diameter of 0.41, 4 clusters per 25mm, and a length of 19mm;
• Customized stainless steel flame height scale 16mm;
• 4-1/4 stainless steel injection needle.

Specifications