Friction Wear Resistance Testing Machine Fully Automatic Four-ball
Friction Tester ASTM D2596
Product Introduction
Basic Function Features
1.Test indicators such as the maximum no-stall load Pb, the sintering
load Pd, the comprehensive wear value ZMZ, and the D value of the
lubricant.
2. Long-term anti-wear test of the lubricant and measurement of the
friction coefficient
3. Special tests for lubricating oil: Stepped friction coefficient
test (SH0762/ASTM5183)
4. KRL Lubricant Shear Test (SH0845)
5. Improve the lubricant production process and control the optimal
economic ratio of the formulation.
Standard Feature Functions
1. Load: Directly and real-time measure the contact load without any
conversion, in accordance with the specific requirements of various
standards such as ISO/ASTM/GB/SH;
2. Operation: Parameter setting, level selection. The operation is
extremely simple, which enhances work efficiency and reduces
operational errors.
High-end configuration with upgradeable functions
1. Fully automatic: High level of automation. After installing the
sample, it can directly enter the fully automatic test (only
requiring 2 buttons).
2. Accuracy: The load and friction force can be self-calibrated
upon startup. The friction force can also be enhanced in accuracy
by using dual sensors.
3. Abrasion Spot: The diameter of the abrasion spot directly shows the
reference value, allowing for quick determination of the level
(without the need for a microscope);
4. Judgment: Multi-directional online detection of PB and PD,
enhancing accuracy and extending equipment lifespan (protection at
the millisecond level);
5. Extended functions: Capable of conducting rapid friction
coefficient step tests (SH0762/ASTM5183) and converting KRL
lubricant shear tests (SH0845);
This series of products is more suitable for customers who are
engaged in scientific research, require high precision, and operate
in heavy-duty laboratory settings.
Product Parameter
Axial test force operating range | 10~10000N |
Friction force measurement range | 0~13500N.mm |
Main shaft frequency conversion speed range | 10~2000r/min |
Oil box stroke | ＞45mm |
Main shaft inner hole taper | 1:7 |
