DHF 82 Fast Multi-Element Chemical Analyzer Elemental Meter
Multi-element Rapid Analyzer
1.Description:
The DHF series multi-element rapid analyzer is an analytical
instrument developed based on the principle of photometric
analysis. It adopts a unique method of linear expansion and
enhanced sensitivity to solve the problems of deviation from
linearity in traditional photometric analysis for high component
contents and poor sensitivity for low component contents. It
achieves rapid analysis over a wide range with high accuracy. It
has significant advantages in the silicate system field, especially
suitable for industries such as ceramics, refractory materials,
cement, glass, geology, and non-metallic minerals. This product has
been widely used in universities, research institutes, factories,
and enterprises, and has entered the international market.
2.Technical Parameter.
1. Measurement range
1-1. Measurement elements and ranges
SiO2: 0.2 - 99% Al2O3: 0.2 - 99% Fe2O3: 0.1 - 99% TiO2: 0.1 - 99%
K2O: 0.1 - 15% Na2O: 0.1 - 15% CaO: 0.1 - 99% MgO: 0.1 - 99%
B2O3: 0.1 - 30% ZrO2: 0.1 - 99% Li2O: 0.1 - 15% SnO: 0.1 - 99%
PbO: 0.1 - 99% ZnO: 0.1 - 99% MnO: 0.1 - 15% Cr2O3: 0.1 - 15%
BaO: 0.1 - 10% NiO: 0.1 - 15% CoO: 0.1 - 10% P2O5: 0.1 - 30%
1-2. Rapid analysis of the main components of the following
chemical raw materials
Chromium salt products, V2O5 products, MnO products, NiO products,
titanium dioxide, phosphate salts, cobalt oxide, zinc oxide, boric
acid, borax, sodium silicate, humic acid sodium.
1-3. High-precision analysis of low-content components
The detection lower limit of elements such as Fe2O3, TiO2, K2O,
Na2O, CaO, MgO, P2O5, MnO, Cr2O3 can be extended to 0.02%, with
analysis accuracy better than 0.02%.
2. Analysis accuracy: The analysis accuracy of each element reaches
or exceeds the allowable error specified in the relevant national
standard analysis methods.
3. Analysis speed: The full analysis of SiO2, Al2O3, Fe2O3, TiO2,
K2O, Na2O, CaO, MgO can be completed within 2-3 hours from the
start of weighing.
4. Injection channels: 3
5. Number of consecutive measured samples: 101. Measurement range
| Parameter | Specification |
| Power Supply | 220V, 50Hz |
| Power Consumption | 1 kW |
| Net Weight | 100 kg |
| Installation Area | 3500 × 850 mm (workbench) |
| Operating Temperature | 5-30°C |
| Relative Humidity | <85% RH |
