Chemical Fiber Filament Heat Shrinkage Tester Fiber Filament Heat
Shrinkage Rate Testing Instrument
1.Product Introduction
The GA-6Q type chemical fiber filament heat shrinkage tester is a
chemical fiber filament heat shrinkage rate testing instrument. The
instrument reads the changes in the length of the chemical fiber
filament on the sample cylinder frame under certain tension before
and after heating through the force measurement device,
automatically calculates the average heat shrinkage rate and
coefficient of variation of the sample. It is controlled by a
computer to operate the process and automatically display and print
the test results.
The instrument has a precise structure, is simple and fast to test,
has accurate and stable test results, and has a low failure rate.
The instrument complies with the precision requirements of the
testing methods standards specified in national standards
GB/T6505-2008 and industry standards FZ66001-1995, etc. It is used
for dry heat shrinkage rate or boiling water shrinkage rate testing
of chemical fiber filaments and can be widely used in chemical
fiber textile enterprises, fiber inspection institutions and
research units.
2.Product Paramter
| Test range of heat shrinkage rate | 0~20% |
| Length measurement error | ≤0.1mm |
| Length measurement resolution | 0.01mm |
| Twisted yarn length | 250mm |
| Force value measurement range | 0~1000cN |
| Force value measurement error | ≤±1% |
| Force value resolution | 0.1cN |
| Number of samples | 20 |
| Machine weight | Above 40kg |
| Machine size | 300×560×680(L×W×H)mm |
