ISO 137 Wool and Cashmere Component Analyzer Fabric Functional
Fabric Machine
1.Product Introduction
The instrument has the following two functions to choose from: 1.
Longitudinal diameter measurement method: For fiber samples with a
circular cross-section, the fibers can be directly arranged in
parallel on a glass slide after being straightened, or cut into 0.2
- 0.4 mm small segments using a Hargreaves slicer and placed on the
glass slide. The longitudinal image of the fiber is displayed on
the screen through the microscopic image processing system, and the
diameter is automatically measured by clicking on the edge of the
fiber. 2. Cross-sectional area method: For fiber samples with a
non-circular cross-section, the fiber samples are first sliced
using a Hargreaves slicer. The transverse cross-sectional slices of
the fiber are placed on the stage, and the cross-sectional area of
the fiber is displayed and measured on the screen through the
microscopic image processing system. Then, the equivalent diameter
is automatically calculated.
The instrument consists of a microscope, a computer, and image
analysis system software. The microscope has three objective lenses
available for selection: 10X, 20X, and 40X. The instrument has a
resolution of 0.1 μm (micrometers) and a measurement range of 2 -
200 μm (micrometers).
The instrument complies with the following standards: 1. GB/T
10685-2007 Test Method for Diameter of Wool Fibers - Projection
Microscope Method, 2. ISO 137-1975 Wool - Determination of Fiber
Diameter - Projection Microscope Method, 3. SN/T 2672-2010 Test
Method for Fineness of Textile Raw Materials (Diameter) -
Microscopic Projection Method, 4. GB/T 16988-1997 Determination of
Content of Special Animal Fibers and Wool in Mixtures, 5. ISO
17751-2007 Textiles - Quantitative Analysis of Animal Fibers by
Microscopy - Cashmere, Wool, Specialty Fibers and Their Blends, 6.
FZ/T 01101-2008 Textiles - Determination of Fiber Content -
Physical Methods, 7. AATCC 20A-2005 Fiber Analysis: Quantitative,
8. FZ/T 30003-2009 Quantitative Analysis Method for Linen and
Cotton Blended Products - Microscopic Projection Method, 9. SN/T
0756-1999 Quantitative Analysis Method for Linen and Cotton Blended
Products for Import and Export - Microscopic Projection Method.
2.Product Paramter
| Diameter measurement method | Longitudinal diameter measurement method and cross-sectional area
method |
| Resolution | 0.1 micrometer |
| Measurement range | 200 micrometers |
