Automatic Fiber Curling Elasticity Tester Fiber Crimp Device
Equipment
1.Product Introduction
The GA-6X type automatic fiber curling elasticity tester is a
sophisticated instrument used for automatically testing the
curling radius, curling elasticity rate and curling number of
fibers. The instrument uses image processing technology for
automatic detection, counting the number of curls of fibers within
a 25mm length under light load, eliminating the subjective errors
and uncertainty in the test results when counting the curls
manually. By measuring the size of the light and heavy loads
applied to the fibers under tension using a force sensor, the
instrument tests the length of the fibers under the set light and
heavy loads and calculates the curling radius; it also tests the
length of the fibers after relaxation under heavy load and
calculates the curling elasticity rate.
The instrument complies with the requirements of the national
standard GB/T 14338 for the test method and is suitable for testing
the curling performance of various single chemical fibers and
natural fibers. It can be widely applied in chemical fiber, textile
enterprises, testing institutions and research units.
2.Product Paramter
| Force measurement range | 0~2000(103cN) |
| Force value resolution | 0.1(103cN) |
| Force measurement error | ≤±1% |
| Sample clamping length | 20mm |
| Lower clamping mechanism stroke | 40mm |
| Length resolution | 0.01mm |
| Timing | automatic |
| Curl count measurement | automatic |
| Curling count length | 25mm |
| Power supply | AC220V±10% |
| Host size | 510×340×420mm |
| Host weight | 20KG |
