Engineering Fiber Tensile Analyzer Engineering Fiber Tensile
Strength Device
Product Introduction
The GA-5X type engineering fiber tensile strength tester is a
testing instrument for measuring the tensile properties of
engineering fibers. It can conduct a single tensile test on the
shortest 4mm length of engineering short fibers, and display the
fiber strength, elongation rate, fixed elongation load, diameter,
strength, modulus and specific work of the single value, average
value and coefficient of variation.
The instrument complies with national standards GB/T 21120,
international standards ISO5079 and the test method standards of
the International Chemical Fiber Standardization Bureau (BISFA),
and can be widely applied in chemical fiber, construction
engineering and other production enterprises, inspection
institutions and research units.
Product Paramter
| Load measurement range | 0~100 cN |
| Load measurement error | ≤±1% |
| Load measurement resolution | 0.01 cN |
| Extension measurement range | 100mm |
| Extension measurement error | ≤0.05mm |
| Extension measurement resolution | 0.1% |
| Lower clamping device descent speed | 1~100 mm/min |
| Lower clamping device stroke | 100 mm |
| Data interface Power supply | RS232,can be equipped with a vibrating thread density meter |
| The weight and size of the mainframe | AC220V±10% |
| Load measurement range | Above 45kg,540×434×560mm |
