Vibration Fiber Fineness Tester Vibrating Fineness Tester Vibratory
Fineness Meter
1.Product Introduction
The GA-8A vibrating fineness tester is a new type of instrument
which conforms to international fiber inspection standards. The
vibration method for measuring fiber linear density is the chemical
fiber linear density testing method of the International Chemical
Fiber Standardization Bureau (BISFA). The GA-8 type vibrating
fineness tester, which was improved recently, has significantly
improved performance compared to the original GA-8 model. It has
obvious advantages in important characteristic indicators such as
rapid vibration start-up and wide applicable tension range, and has
received high praise from users. In recent years, it has been
promoted rapidly and has basically replaced the original
mid-section weighing method.
This instrument complies with national standards GB/T 14335, GB/T
16256, international standards ISO1973 and the test method
standards of the International Chemical Fiber Standardization
Bureau (BISFA), and is suitable for the linear density measurement
of single fibers. It can be widely used in chemical fiber, textile
production enterprises, inspection institutions and research units.
2.Product Paramter
| Yarn density measurement range | 0.6~40dtex |
| Yarn density measurement error | ≤±2% |
| Clamping length | 20mm |
| Length error between upper and lower knife edges | ≤±1% |
| Pre-tension clamp accuracy | ≤±0.5% |
| Resonant frequency measurement error Power | ≤±0.5% |
| supply | 220V~±10% |
| Overall machine weight | Above 10kg |
| Size | 393×300×320(mm) |
