Engineering Fiber Tensile Testing Machine Engineering Fiber Tensile
Strength Instrument
1.Product Introduction
The GA-X1 Fiber Vibration Linear Density Tester conforms to
international fiber inspection standards. The vibration method for
measuring fiber linear density is the testing method for chemical
fiber linear density of the International Bureau of the
Standardization of Man-made Fibers (BISFA). The performance of the
GA-X1 Fiber Vibration Linear Density Tester, which was improved and
produced in recent years, has been significantly enhanced. It has
obvious advantages in important characteristic indicators such as
rapid vibration start-up and wide tension application range, and
has received high praise from users. In recent years, its promotion
has been particularly rapid, basically replacing the original
mid-segment weighing method. When the GA-X1 Fiber Vibration Linear
Density Tester is connected to the XQ series tensile strength
tester, it can accurately test the specific strength, initial
modulus and breaking work of a single fiber.
This instrument complies with national standards GB/T 14335 and
GB/T 16256, international standard ISO1973 and the test method
standards of the International Bureau of the Standardization of
Man-made Fibers (BISFA). It is suitable for the determination of
the linear density of a single fiber and can be widely used in
chemical fiber, textile and other production enterprises,
inspection institutions and research units.
2.Product Paramter
| Linear density measurement range | 0.6~40 dtex |
| Linear density measurement error | ≤±2% |
| Clamping length | 20 mm |
| Length error between upper and lower knife edges | ≤±1% |
| Pre-tension clamp accuracy | ≤±0.5% |
| Resonant frequency measurement error | ≤±0.5 |
| Power supply | AC220V±10% |
| Overall weight of the machine Size | 10 kg |
| Linear density measurement range | 490×330×380(mm) |
