Flame Retardant Performance Testing Device For Safety Helmets

Meets the requirements of the flame retardant performance testing standards for safety helmets in GB/T 2812-2006 "Test Methods for Safety Helmets" and GB/T 2811-2007 "Safety Helmets". Mainly used for testing the flame retardant performance of safety helmets, widely used in safety helmet production enterprises, major quality inspection units, and construction engineering testing stations.

Test method: The flame retardant performance tester for safety helmets should be tested in a fume hood. The safety helmet that has undergone high temperature impact testing should be clamped onto the bracket in the direction of normal wear, with the side of the hood aligned with the flame nozzle. The axis of the flame nozzle should be adjusted to pass through the axis of the hood and be 50mm ± 1mm above the edge of the hood to avoid opening air holes; Adjust the position of the bracket so that the distance between the testing area of the safety helmet and the end face of the flame nozzle is 45mm ± 1mm, and then move it away; Open the gas volume control valve and adjust the flame length to 50mm ± 2mm, ensuring that the flame has at least 15mm of blue flame; Move the bracket to the previously determined position, and the flame acts on the cap shell for 10 seconds, cutting off the air source. Record the reignition time and possible penetration phenomena, accurate to 0.1 seconds.

Instrument features

1. Electronic ignition; The burner is automatically timed and positioned.

2. The ignition time can be set arbitrarily from 0 to 99.9 seconds, and the reignition time and smoldering time are automatically recorded and displayed digitally.

3. The flame height can be adjusted, with a flame height ruler to assist in determining the flame height, and equipped with a flame temperature measurement device.

4. The "push-pull" sample holder fixing device is assisted by "positioning wire" and "guide rails" for positioning.

5. Equipped with a highly sensitive combustible gas leakage alarm device, which will automatically shut off the gas if any combustible gas is detected.