Solid insulation material electrical strength testing machine (electrical dielectric strength tester)

Mainly suitable for solid insulation materials such as plastic, film, resin, mica, ceramics, silicone, glass, insulating paint, etc. Measure the breakdown strength and withstand voltage time at power frequency (48-62Hz) or corresponding DC voltage in air or liquid medium. Suitable for continuous and uniform boosting or stepwise boosting, apply AC/or DC voltage to the sample until breakdown, measure the breakdown voltage value, and calculate the breakdown strength of the sample; Using a rapid voltage increase method, raise the voltage to the specified value and maintain the sample without breakdown for a certain period of time. The specified value at this time is the withstand voltage value of the sample.

Complies with the requirements of GB1408.1, IEC60243-1 "Test Methods for Electrical Strength of Solid Insulation Materials - Tests at Power Frequency", GB1408.2, IEC60243-2 "Test Methods for Electrical Strength of Solid Insulation Materials - Corresponding DC Voltage Test" GB/T1695-2005 "Determination of Power Frequency Breakdown Voltage Strength and Withstand Voltage of Vulcanized Rubber" GB/T3333, GB12656, and ASTM D149 test standards.

1. Test voltage: AC 0-50 kV continuously adjustable, DC 0-50 kV continuously adjustable
2 Transformer capacity: 10 KVA
3 Breakdown voltage: 0 to 50kV
4. Voltage increase speed: It is available in six Settings: 50, 100, 200, 500, 1000, and 2000 (KV/S)
5. Voltage boost speed regulation: It is an electrical automatic speed regulation
6. Voltage measurement accuracy: ≤ 2%
7. Leakage current selection: 1 to 20 mA
8. Test methods: DC test, AC test
9. Voltage boosting method: Automatic programmable voltage boosting
10. Power supply frequency: 50Hz sine wave
11. Power Supply: AC220V 50/60Hz
12. Dimensions: length 1400*width1040*height 1500 mm
13. Weight: 200KG