Hero X fiber image transmission integrated
remote control integrates fiber image transmission ground unit,
display and remote control in one, with our fiber image
transmission air unit F1, F2, F3, can easily realize 0~30km (80km
can be customized) fiber signal stable transmission. Through
optical fiber as a high-speed, low-delay data transmission medium,
the high-definition video signal captured by the UAV is transmitted
back to the remote control in real time. At the same time, the OSD
displays the battery power, aircraft attitude, GPS information,
flight control mode, unlocking state and other information, and the
flight control of the UAV is carried out through 15 physical
channels. Optical fiber transmission system has greatly improved
the application range because of its super bandwidth, super
anti-interference and extremely low delay.
The fiber remote controller HeroX uses Linux system and has rich
interfaces. Including fiber FC interface, RJ45 interface,
GH1.25-8Pin interface (SBUS/UART/ETH) and dual Type C interface,
etc. Fiber transmission can be realized by connecting the fiber
image air unit through the standard fiber FC port. By
connecting the RJ45 interface with the standard network cable, the
real-time video transmission can be synchronized displayed on the
PC or the ground station to share the flight data. GH1.25-8Pin
interface (SBUS/UART/ETH) is convenient to control the aircraft and
control the pan, pod and other equipment. It supports Mavlink/CRSF
protocol, and data transmission supports open source flight control
like PIX, APM and Betaflight. Type-C interface 1 is used for data
storage, and Type-C interface 2 can realize the charging of the
remote control. When the power of the external equipment is
insufficient, the remote control can also discharge to realize the
power supply of the external equipment, which is easy to use.
Hero X adopts aviation aluminum alloy material, reasonable
structure design, to ensure small size, light weight (only 0.8kg),
with a good feel. Built-in 7 inch 1920*1200 high brightness touch
screen, the highest brightness of 2000nit outdoor visibility. Four
removable 18650 (3500mAh*4) lithium ion batteries, fully charged
can work for 9 hours, support PD (45W) /QC protocol charging, one
hour can be full of 80% of the power, and a digital tube real-time
display battery power information, outdoor use of insufficient
power can use the power bank power supply. The peripheral interface
is made dust-proof, splashproof and other protection measures to
ensure the stable and smooth operation of the equipment in the
harsh environment.
