Special Carbon Deposit Cleaner For Auto Repair Rapidly Dissolves
Carbon
Function:
This product is specially used for cleaning the inside of the
engine. It has strong cleaning power and high cleaning efficiency.
It only takes 3 minutes without dismantling the engine to quickly
remove carbon deposits, colloids and oxidation sediments in the
crankcase, piston, rings, main and fine oil channels. After use, it
can improve engine operating efficiency, reduce failures, increase
horsepower and extend engine service life.
| Name | Motor Flush | Brand | Biaobang | | Application | Cleaner & Wash | | Model Number | VL10010 | | Capacity | 443ml | | Carton size | 420×285×168(mm) | | Carton specification | 24 bottles | | Carton weight | 10.54kg | Shelf life | 3 years |
Product Advantages:
No need to disassemble, 3 minutes of ultra-fast cleaning No need to disassemble the engine, saving labor and time costs, and
efficient cleaning can be completed in just 3 minutes, which is
suitable for efficient operation of fast repair chains and auto
repair shops. Powerful removal of stubborn carbon deposits Professional formula, deeply removes carbon deposits, sludge,
colloid and oxides in core parts such as crankcases, pistons,
rings, oil channels, etc., and restores the engine to a clean
state. Increase power and reduce failures After cleaning, the engine runs more smoothly, effectively improves
compression and power output, reduces engine noise and wear, and
reduces abnormal vibration and carbon deposit failure rate. Extend engine service life Reduce wear and high temperature problems caused by carbon
deposits, delay engine aging from the source, and extend the life
of core components of the vehicle. Widely adaptable, safe and efficient Applicable to a variety of gasoline engine types, mild and
non-corrosive to metals and seals, safe and reliable to use, and
car owners can use it with more peace of mind.
Operation Specifications: Preheat the engine Start the vehicle and run the engine to normal operating
temperature (idle for 3-5 minutes). Turn off the engine Turn off the engine to ensure safe operation. Add carbon cleaner Open the engine oil filling port and pour the entire bottle of
carbon cleaner into the crankcase (i.e. the oil filling port). Start the engine again Start the engine and keep it idling for 3-5 minutes, do not run at
high speed, and avoid load. Replace the engine oil and filter After cleaning, replace the engine oil and filter immediately,
drain the dirty oil and cleaning residual liquid to prevent
impurities from remaining.
Notices: The oil and filter must be replaced This product is a strong detergent that will bring out a lot of
carbon deposits and impurities. Failure to replace the oil after
use will seriously affect the engine. Not suitable for diesel engines Please confirm the vehicle engine type. It is only used for
gasoline vehicles. Avoid too long idling time The cleaning time can be controlled within 3-5 minutes. Too long
time may cause overheating or detergent dilution of the oil. Be careful when operating Avoid hot oil splashing when adding; the operating place should be
well ventilated and away from open flames. Do not use for engines that are severely worn or about to be
overhauled If the engine itself has serious problems such as poor piston ring
sealing, large amounts of oil burning, and heavy carbon deposits,
it is recommended to repair it before use.
|
