500ml Shock Resistant Rubberized Undercoating Spray for Corrosion Protection and Undercarriage Maintenance

Spray Chipping Coat protects the undercarriage from erosion and salinization, providing durable protection against environmental damage.

Quick-drying Spray Chipping Coat is specially formulated to protect vehicle undercarriages from oxidation and rust caused by prolonged exposure to wet ground environments. It can also be applied to side skirts, front and rear bumpers to prevent scratches from sand and stone impacts during driving. Particularly suitable for protecting new vehicles, seafood transport vehicles, salt field vehicles, and mechanical equipment from alkaline water erosion and salinization.

• Specifically protects the undercarriage, preventing oxidation and rust caused by long-term exposure to moist ground environments
• Can be sprayed on side skirts, front and rear bumpers to prevent scratches caused by gravel impact during driving
• Especially suitable for new cars, seafood transport vehicles, salt field vehicles and mechanical equipment, resisting alkaline water erosion and salinization

1. First, clean the area to be sprayed, removing oil, dust, rust and other debris
2. Shake the product can for about 1-2 minutes to fully mix the contents inside
3. Keep the can 20-30 cm away from the surface to be sprayed, and spray back and forth at a uniform speed to form a continuous protective film
4. If a thicker coating is needed, repeat spraying 1-2 times after the first layer dries (about 10-15 minutes)
5. After spraying, invert the can and press the nozzle for 2-3 seconds to clean the remaining material in the nozzle to prevent clogging
6. Avoid contact with water or other debris after application, and it can be used normally after completely drying (usually about 30 minutes)