TY180 Hydraulic Puller Machine With Liquid Cooling System Diesel
Engine For Overhead Stringing TY180 Hydraulic Puller | - The machine allows for the tension stringing of 4-bundle conductor
of 630mm2 and below in mountainous and hilly areas, and of 4-bundle
conductor of 720mm2 and below in flat lands;
- Besides, it can be used for traction stringing of OPGW or ADSS
optical cable and 500kV traction stringing in various terrains,
suitable for use at altitudes up to 1500 meters above sea level.
| Performance | Max pull | 190kN | Max continuous pull | 180kN | Speed at max pull | 2.5km/h | Max speed | 6km/h | Pull at max speed | 75kN | Characteristics | Bull-wheel diameter | 750mm | Groove number | 10 | Max rope diameter | 28mm | Max diameter of rope reel | 1400mm | Total weight | 6700kg | Overall dimension (length*width*height) | 5000x2300x2500mm | Engine | Diesel | 325hp Euro III, 4-stroke cycle, turbo-charged | Cooling system | liquid | Electrical system | 24V | Main configuration | Engine | Cummins | Hydraulic pump | German Rexroth | Main motor | German Rexroth | Speed reducer | German Rexroth | Tail bracket hoisting motor | American Eton | Hydraulic meter | German | Operating handle | German Rexroth |
Hydraulic Transmission | - Closed hydraulic circuit for step less speed variation in both
rotating directions. This machine is provided with a pull
pro-setting system that maintains the pre-set pulling value (also
when the speed is reduced to "0") by automatically adjusting the
operation speed according to the friction and unexpected loads
which may occur.
| Configuration | - Hydraulic dynamometer with set-point and automatic control of
maximum pull
- Hydraulic oil cooling system
- Control instruments for hydraulic system and diesel engine
- On board reel winder with automatic level wind, suitable for
standard reel mod. 1100 and 1400
- Hydraulic front stabilizer, Grounding connection point
| Additional Devices | - Lighting system for the trailer
- Hydraulic rope clamp for reel change
- Swivel guide rope roller
- Trailer for towing at max speed of 30 km/h
- Extra shaft
- Digital speed and meter counter (extra charge)
| Additional Devices | - The chassis provided with Brake, back lights and mudguard, with a
single point lift to allow lifting with a crane.
- Cable and radio remote control fully replacing all controls at
machine panel.
- Remote diagnosis via GSM network with GPS modem, Synchronization
system
- Hydraulic system for drum stand control with flat face quick action
couplings
- Auxiliary Hydraulic system (700/1000 bar) for power pressing tool
- Lockable toolbox, Holding fixture for hose kit, Grounding plate,
Acoustic insulation
- Biodegradable hydraulic oil, Allowable tension indictor, Overload
tension alarm, First Aid Kit
- Manufacturer's workshop maintenance manual, in English
- Manufacturer's recommended tools.
- Manufacturer's routine spares for five years' duty (filters, bulbs,
etc.).
|
|
