Characteristics - Bull-wheel diameter: 540mm
- Groove number: 8
- Max rope diameter : 21mm
- Max diameter of rope reel: 1400mm
- Total weight: 4350kg
- Overall dimension (length*width*height): 4500×2100×2450mm
|
Performance - Max pull: 100kN
- Max continuous pull: 90kN
- Speed at max pull: 2.5km/h
- Max speed: 5km/h
- Pull at max speed: 40kN
|
Main configuration - Engine: Cummins
- hydraulic pump: German Rexroth
- Main motor: German Rexroth
- speed reducer: German Rexroth
- Tail bracket hoisting motor: American Eton
- Hydraulic meter: German
- Operating handle: German Rexroth
|
Engine - Diesel 118kw(158hp) Euro II, 4-stroke cycle, turbo-charged
- Cooling system liquid
- Electrical system 24V
|
Hydraulic Transmission - Closed hydraulic circuit for step less speed variation in both
rotating directions. This machine is provided with a pull
pro-setting system that maintains the pre-set pulling value (also
when the speed is reduced to "0") by automatically adjusting the
operation speed according to the friction and unexpected loads
which may occur.
|
Configuration - Hydraulic dynamometer with set-point and automatic control of
maximum pull
- Hydraulic oil cooling system
- Control instruments for hydraulic system and diesel engine
- On board reel winder with automatic level wind, suitable for
standard reel mod. 1100 and 1400
- Hydraulic front stabilizer
- Grounding connection point
|
Additional Devices - Lighting system for the trailer
- Hydraulic rope clamp for reel change
- Swivel guide rope roller
- Trailer for towing at max speed of 30 km/h
- Extra shaft
- Digital speed and meter counter (extra charge)
|
Additional Devices - The chassis provided with Brake, back lights and mudguard, with a
single point lift to allow lifting with a crane.
- Cable and radio remote control fully replacing all controls at
machine panel.
- Remote diagnosis via GSM network with GPS modem, Synchronization
system
- Hydraulic system for drum stand control with flat face quick action
couplings
- Auxiliary Hydraulic system (700/1000 bar) for power pressing tool
- Lockable toolbox, Holding fixture for hose kit, Grounding plate,
Acoustic insulation
- Biodegradable hydraulic oil, Allowable tension indictor, Overload
tension alarm, First Aid Kit
- Manufacturer's workshop maintenance manual, in English
- Manufacturer's recommended tools.
- Manufacturer's routine spares for five years' duty (filters, bulbs,
etc.).
|
