IPX3 / IPX4 Spraying And Splashing Water IP Testing Equipment R800 Oscillating Tube
|
|
IPX3/IPX4 Spraying And Splashing Water IP Testing Equipment R800 Oscillating Tube
Standard of IP Testing Equipment: IEC 60529: 2013 Degrees of protection provided by enclosures (IP Code)
Application: Test for second characteristic numeral 3 & 4 with oscillating tube. We offer chamber type and open type for IPX3/4 spraying and splashing test equipment.
Feature of IP Testing Equipment: The total flow rate is adjusted and is measured with a flow meter. The oscillating tube is provided with spray holes over an arc of 60° either side of the centre point. The enclosure to be tested is placed at the centre point of the semicircle. The tube is caused to oscillate through an angle of 120°, 60° on either side of the vertical, the time for one complete oscillation (2 × 120°) being about 4 s and the test duration being 5 min. The enclosure is then turned through an horizontal angle of 90° and the test is continued for a further 5 min. The maximum acceptable radius of the oscillating tube is 1600mm.
Parameter of IP Testing Equipment:
|
||||||||||||||||||||||||||||
| Product Tags: Splashing Water IP Testing Equipment R800 Oscillating Tube IP Testing Equipment |
|
IP Testing Equipment Plug Pin Retention Strength Tester for IEC 60884 / IEC 60529 Compliance Electrical Safety Testing |
|
Vertical Drip Water Test Equipment with 7 Inch Color Touch Screen 200mm Drip Height and Φ0.4mm Needle Hole for IPX1 to IPX2 Testing |
|
Professional 0 ~ 6bar Pressure Water Tightness Tester with 0.25 Degree Gauge Accuracy and 0-99min Testing Time for Immersion Waterproof Testing |
|
IPX8 waterproof immersion device according to IEC 60529 |
|
IPX8 Certified Intelligent Waterproof Immersion Test Equipment Simulated Water Depth Up To 50 Meters 60529 Standard |
|
IP Testing Equipment High-Pressure Watertight Test Chamber , Precise Pressure Control , Reliable Waterproof Verification |