Button Switch Endurance 50Hz Plug Socket Tester

Switch Plug Socket Endurance Tester 3 Stations For button Switch Independent Control

Standard:

IEC 60884-1 'Plugs and socket-outlets for household and similar purposes – Part 1: General requirements' clause 20 Breaking capacity and clause 21 Normal operation, figure 16.

Standard description:

20 Breaking capacity:

Accessories shall have adequate breaking capacity.

Compliance is checked by testing socket-outlets and plugs with pins which are not solid, by means of an appropriate test apparatus, an example of which is shown in figure 16.

21 Normal operation:

Accessories shall withstand without excessive wear or other harmful effect, the mechanical, electrical and thermal stresses occurring in normal use.

Compliance is checked by testing socket-outlets, and plugs with resilient earthing socketcontacts or with pins which are not solid, by means of an appropriate test apparatus, an example of which is shown in figure 16.

Application:

It is applicable for the switches breaking capacity and normal operation life test of household and similar fixed electrical installations, also suitable for plugs and sockets’ breaking capacity and normal operation life testing of the household and similar purposes. The test equipment simulates the switches, plugs and sockets, long-time rotation, insertion and withdraw actions, for assessing whether the switches, plugs and sockets are able to withstand the normal use of mechanical damage and electrical fatigue damage, and whether the contact points has adhesion phenomenon, long-term closed or disconnected phenomena, to examine whether the test samples are excessive worn or have other harmful consequences. It is special test equipment for switches and plug-sockets electrical endurance test.

Test sample:

Button switch, plug and socket.

Feature:

The test equipment can do endurance testing for button switches, plugs and sockets. Coupled with the external load bank (resistive, inductive and capacitive) can process loading test, it has a corresponding control system. 

The test machine is made of aluminum frame, stainless steel seal plate, driven by the servo motor and ball screw, with 7-inch color touch screen, PLC control system, humanized operation interface and powerful digital display. The test times, conduction current time, test speed can be preset. It has the electric current display function that can show the sample’s conduction current. The whole test machine has 3 working stations. When there are continuously switched on or off due to the adhesion or failure, it will alarm and record the appropriate number of experiments, and it alarms when the test times reach the preset value. The test machine will automatically stop when an alarm occurs.

Parameters:

Calibration certificate: