Glow Wire Flammability Testing Equipment With Electrical Control And Button Operation
|
The New Glow Wire Tester Of IEC60695 With Electrical Control And Button Operation
Product information This device is manufactured according to the standard of IEC60695-2-10, IEC60695-2-13. It also conforms to the standard requirement of UL746A. This device simulates the thermal stress caused by the heat source or ignition source such as the glowing elements or overload power within the short period of time, applicable to the fire hazard test for the electric and electronic products, household appliances and the materials, and also used for the no-flame ignition source fire test in order to measure the ignition temperature, flammability and heat-resistance index of the glow wire made of the relevant materials.
The test equipment adopts to solenoid valve switch to control the burning depth of test specimen and equipped with measuring gauge. The test specimen will withdraw automatically from glowing filament after reaching the set time. Also adopting the original imported UK LAB K type armour (Ф1mm) whose temperature resistance is up to 1100° (exceed 1050°of standard requirement), this device is with accuracy temperature control.
Technical Parameters
Test principle The glowing filament whose material and shape is required(Ni80/Cr20)is heated to the testing temperature of 550 ℃ ~ 960 ℃ for 1 min by using the glow wire tester with large current. Then using required pressure (1.0N) vertically burns the test specimen for 30s. By observing whether the test specimen and bedding object is ignited and the burning time, the users can judge the ignition danger of electric and electronic products. It is used for the ignition test, ignition temperature (GWIT) test, flammability test and flammability index (GWFI) test of solid insulating material and other solid combustible material.
Common Faults And Treatment
|
||||||||||||||||||||||||||||||||||
Product Tags: flammability tester flame test equipment |
![]() |
IEC60695 220V / 50Hz Horizontal And Vertical Flame Tester - 50W And 500W |
![]() |
IEC60695 220V 50Hz Leakage Tracking Tester 45 - 50 Drops / cm3 |
![]() |
Needle Flame Test Apparatus For Fire Hazard Testing Touch Screen Operation |
![]() |
IEC60332-1 Flammability Testing Equipment For Single Insulated Wire Or Cable Burner Tilt 45° |
![]() |
IEC60695-2-10 Flammability Testing Equipment PLC Control |
![]() |
Flammability Testing Equipment IEC60695 0.1Mpa Horizontal And Vertical Combustion Equipment |