Stainless Steel Battery Burning And Ejection Test Equipment with PLC Touch Screen

Easy Operation PLC Touch Screen Stainless Steel Battery Burning And Ejection Test Equipment

Standard

IEC60086-4 clause 6.2.6,6.2.8 ,IEC62133,UL 1642,UL2054,GB31241 and etc.

Applications

This battery burning tester is necessary testing equipments for various battery manufacturer, quality inspection & control department. With features of easy operation, safety reliable, high accuracy, it becomes ideal testing machine for battery burning and ejection testings.

Testing Method

1.Fix the mesh on top of the burner with 38.1mm distance,each 25.4mm mesh with 20 holes, steel wire diameter 0.43mm.

2. Ignition the burner, simultaneously observe the battery burning situation,till battery explode or burn out. And time the whole burning procedure.

Parameters

Notices

1. Battery burning ejection test & particle test is high dangerous destructive test,testing personal must be well trained with related safety & emergency handling knowledge, avoid personal injuries.

2.Burning device should put in the filtered air ventilate chamber,pay attention the waste air exhaust should comply with related national standards.

3. Testing personal must wear smoke proof expiratory device and filter expiratory devices, avoid suction harmful gas.

4. Before burning test,should strictly check the air pipe & connections sealing performance.

5. Multi fire extinguish devices should prepared close to the testing machine.

6. During testing or the bunsen light not totally cooling down, forbid to touch the sample burner or mesh.

7. After finishing test, should lock all the valve and well do the machine usage records, avoid air leakage of the gas tank.

8. Regularly check if the gas pipe broken or not,if broken, do stop use it,and replace with new ones.

Accessories