IEC 60598-1 Light Testing Machine Tumbling Barrel Tester With 3 mm Steel
|
|
IEC 60884-1 Plug Socket Tester Tumbling Barrel Tester With 3 Mm Steel
Product Introduction
This tester conforms to the standard requirement of IEC60598-1. It is used to check the drop resistance of electrical accessories. The falling times can be preset. The device stops working automatically when the preset times completed.
Technical Parameters
Test Method
1. Place the tester on a level ground, connect to specified power supply. 2. Set test times. Press left arrow choose digit position, up and down arrow to set value, then press【MD】save. 3. Put test sample into the barrel, lock the door. 4. Press start, tester starting rotating. 5. Tester will alarm and stop automatic when preset test times completed. Press【Reset】eliminate the alarm. 6. Take out test sample, check the test result.
Note: please use specified power supply, improper power supply affect the rotating speed and may damage the motor.
Picture for reference:
|
||||||||||||||
| Product Tags: light testing equipment led light tester |
|
PLC Control Light Testing Equipment Conforms To IEC60598 Clause 4.14.3 Easy To Operate |
|
IEC60598-2-8 Impact Tester For Handlamps With 400mm And 1000 Mm Impact Height |
|
IEC62560 Clause 15 Circuit Figure 8 Light Testing Equipment For Non - Dimmable Lamp |
|
Digital Control Lamps Light Testing Equipment Adjustment Devices Of Torsion And Bending Test According To IEC60598 |
|
PLC Control LED Light Tester , 250v Self Ballasted Lamp Switches Endurance And Load Integrated Test System |
|
IEC60669-1 LED Testing Equipment / Self Ballasted Lamp Switches Fully Automatic Breaking Capacity Endurance Tester |