Coupler Withdrawal Testing Apparatus Used To Ascertain The Maximum And Min. Force
|
Coupler Withdrawal Testing Apparatus Used To Ascertain The Maximum And Min. Force
Standard:Confirm to the IEC60320-1 clause 16 figure12 standard requirement.
Application:This device is mainly used to ascertain the maximum force necessary to withdraw the connector from the appliance inlet and the minimum force necessary to withdraw a single pin gauge from the appliance inlet, it can also for testing connectors for hot conditions and those for very hot conditions.
Test sample:Coupler.
Feature:This device consists of a control cabinet, mounting plate, heating device, instrument input socket (standard equip with 10A for testing connectors for hot conditions, 10A and 16A for very hot conditions) hook, and the principle weight,supplementary weight. The appliance inlet is fixed to the mounting plate A of an apparatus as shown in figure 12, so that the axes of the appliance inlet pin are vertical and the free ends of the pins are downwards. For testing connectors for hot conditions and those for very hot conditions, a heating device C is provided, and on this the appliance inlet is mounted. The principle mass is hung on the connector without jolting and the supplementary mass is allowed to fall from a height of 5 cm on to the principal mass. The connector shall not remain in the appliance inlet. For testing connectors for hot conditions and for very hot conditions, the heating function should be turned on, start testing the maximum withdrawal force after achieving to the temperature. . Parameters: 1. Power supply:220V,50/60HZ. 2. Table 3-Maximum and minimum withdrawal forces
3. Maximum withdrawal forces
4. Minimum withdrawal forces
5.The heating gauge of 10A for testing connectors for hot
conditions, 10A and 16A for very hot conditions, others are test
gauge in cold conditions, test gauges are optional.
|
|||||||||||||||||||||||||||||||
Product Tags: electrical socket tester mechanical switch tester |
![]() |
Compression Test Device Multi-function Socket Tester Plug Socket Tester Complies With IEC60884-1 Standard |
![]() |
Rate Of Flexing 10~60 Rpm Adjustable Power Cord Flexing Tester With Plug Socket Tester |
![]() |
IEC60884-1 Switch And Plug - Socket Endurance Tester With Liner And Rotating Station |
![]() |
IEC 60884-1 Tumbling Barrel Testing Machine 5rpm 10 Time Per Min |
![]() |
UL486A - 486B UL498 SD5.3 Test Method B Conductor Damage Degree Test Machine |
![]() |
IEC60884-1 Plug Socket Tester Temperature Rising Tester 0-125A Testing Current |