| Product name: | 17AM temperature current thermal protector for drum washing machine |
| Rated Current: | 16A/125VAC,8A/250VAC |
| Operating Temperature, | 50～170℃,Tolerance±5℃(details as per attached list). |
| Tensile Test: | The wiring terminal of the product shall be able to withstand a
tensile force greater than or equal to 50N. The riveted joint shall
not be loose and the wire shall not break or slide out. |
| Insulation Voltage: | a. The thermal protector should be able to withstand AC880V between
the wiring after thermal breakdown, lasting for 1min without
breakdown flashover phenomenon; b.AC2000V can be withstood between the terminal lead of the thermal
protector and the insulating shell, lasting for 1min without
breakdown flashover phenomenon; |
| Insulation Resistance: | Under normal conditions, the insulation resistance between
conductor and insulation shell over 100 m Ω.(the meter used is
DC500V insulation resistance meter). |
| Contact Resistance: | The contact resistance of thermal protector should be not more than
50 m Ω(do not contain lead). |
| Air Tight Test: | Protector in greater than 85℃ water(water is not boiling),it should
be no continuous bubbling. |
| Heating Test: | The product place 96 hours at 150 ℃ environment. |
| Wet Resistance Test: | The product in the environment of the 40 ℃, relative humidity 95%
for 48 hours. |
| Therma Shock Ttest: | Products in 150℃, 20℃ environment alternating place every 30 min, a
total of five cycles. |
| Vibration Resistance Test: | The product can withstand the amplitude of 1.5mm, frequency change
of 10 ~ 55Hz, scanning change period of 3 ~ 5min, vibration
direction X,Y, Z,it vibrates continuously in each direction for 2
hours. |
| Drop Test: | The product dropped freely once from the height of 0.7m. |
