OEM ODM 220V Zumex Orange Juicer / Centrifugal Juicing Machine For Bar

220V Zumex Orange Juicer / Centrifugal Juicing Machine For Bars , OEM ODM.

Konmax Orage Juice Squeezer Specification:

1.Power supply:220--230V 50HZ /110--120V 60HZ
2.Power consumption:120W
3.Size of orange required:40--80mm
4.Output: 22-25 oranges/per minute
5.Machine Size: 400L*300W*770H mm(length*width*height)
6.Net Weight: 42kg
7．Security:　Safety cut out switches
The machines will stop operating without the cover place.
8. ConVeyance: Qty/20' FCL: 120sets

Konmax Orage Juice Squeezer Detailed Photo:

Konmax Orage Juice Squeezer Accessory:
A pair of peeling implement(two),one of 5A fuze,one of cross implement, one of 8-10mm spanner,one of  electronic supply.

Konmax Orage Juice Squeezer Production Scene:

 Konmax Orage Juice Squeezer Application Photo:

 Konmax Orage Juice Squeezer Safety Notice:
Avoid dangerous please followed by the next step: 
1. Ensure read and understand all the explanations. 
2. Only use the specifically marked AC power source(230V/50HZ,120V/60HZ). 
3. For the safety purpose,only use connect power to the grounded connector plugs.
4. Ensure machine is disconnected from main power and turn off the power before you clean it.
5. Do not touch the power connect plug.
6. Only used for citrus and lemon. Do not used for other fruit.
7. Do not use for peach, mango etc, in case it damage. 
8. Do not put your hands in the machine while it working. 

Konmax Orage Juice Squeezer Cleaning Instruction:

1.Begin by unplugging the juicer.
2.Disassemble the juicer completely.
3.Dump the bin or container that catches the pulp and scrape it out with a spatula.
4.Rinse each piece under running water.
5.Use the small brushes to clean the small areas, there are small brushes available such as nail brushes

that  can  be used to clean the nooks and crannies
6.For more thorough cleanings, fill the sink with water and add dish soap.

7.Soak each piece for a few minutes and then wash with a brush or soft cloth.
8.Pay special attention to the mesh strainer as this can quickly build up with pulp and juice debris. Do not

allow  the juice particles to dry in this fine screen or they will be difficult to remove.
9.Use a soft cloth or sponge moistened with water to wipe down the machine itself. Although the juice is

designed  to go through a certain route in the juicer, juice and pulp will end up everywhere.
10.Allow all of the pieces to dry completely. It is fine to set them on a towel or drying rack.
11.Reassemble the juicer.