PET Plastic Bottle Blowing Mold Machine 8000BPH 6 Cavities Automatic For Drinking

8000BPH 6 Cavities Automatic PET Plastic Bottle Blow Molding Machine For Drinking Water Bottling Plant With Servo Device

EX9000 Full automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. This EX9000 bottle blowing machine uses aluminum mold. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics and wide-mouth bottle etc. This bottle blowing machine stretches the preform by controlling the stretching rod by servo motor. The advantage is that it can be stretched in sections, firstly position the preform,ensure the verticality of the preform when stretching then secondary stretching.Ensure uniformity and consistency of stretch of each preform. At the same time, the blower is faster and less energy consumed.

2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity in variable.
5). High safeties with security automatic-locking device in each mechanica laction, whichwill make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6). Introduce the FESTO air cylinder to avoid contamination and noise.
7). Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8). Strong clamping force with high pressure and double crank links to lock the mould.
9). Two ways of operating: automatic and manual.
10). Safe,reliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.
11). Low cost,high efficiency,easy operation and maintenance etc, profited from the fully automatic technological process.
12). Ideal cooling system make the finished bottles without any flaws.
13). Easy for you to install,test and start up.
14). Low rejection rate: less than 0.2 percent.