100M Singlemode / Multimode Fiber Optic Media Converter for Ethernet

100M Singlemode / Multimode Fiber Optic Media Converter for Ethernet
 

Description:

Fiber Media Converter is the conversion equipment of Ethernet optical-electronic signals between 10/100M UTP interface (TX) and 100M Fiber interface (FX).

Features:

1. Auto negotiation function allows UTP port to auto select 10M or 100M and Full Duplex or Half Duplex
2. UTP port supports MDI / MDI-X auto crossover.
3. Supporting flow control
4. Supporting 1552 bytes packet
5. Extend fiber distance up to 2km for multi-mode fiber and 20-120km for single-mode fiber
6. Internal circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction.
7. Supports link fault pass through function

Technical Specification:

1. Operating standard:
   IEEE802.3 10BASE-T Ethernet
   IEEE802.3u 100BASE-TX/FX Fast-Ethernet
   IEEE802.3x
2. MAC address table: 1K
3. Data Buffer :128Kb RAM
4. Connector: UTP: RJ-45,10/100Mbps; Fiber: SC,100Mbps
5. Cable:
   UTP: Cat. 5 UTP (the max distance up to100m)
   Fiber ( Singlemode): 8.3/125, 8.7/125, 9/125, 10/125μm(the max distance up to 90km)
6. Flow control
   Full Duplex:IEEE802.3x
   Half Duplex:back pressure
7. LED: Power, FX 100, FX Link/Act, TX 100, TX FDX, TX Link/Act.
8. Power :Input:AC 110~265V or DC:-36V~-72V
   Output:DC 5V 1A
9. Conversion mode: Medium conversion
10. MTBF: 80,000 hours
11. Ambient temperature: 0 ～ +50℃
12. Storage temperature: -20 ～ +70℃
13. Humidity:5% ～ 90%
14. Dimensions:
    Power external: 26 (high) x 70 (width) x 94 (length) mm
    Power internal type: 30 (high) x 110 (width) x 140 (length) mm

Fiber Information:

Shipping:

1. Door to Door: by express (such as DHL, UPS, TNT, FedEx etc.)
2. Airport to Airport: by air
3. Seaport to Seaport: by sea (our location Shenzhen is a seaport.)