High Speeding Flexo Printing Machine EPC Control Ceramic Anilox Roller

High Speeding Flexo Printing Machine EPC Control Ceramic Anilox Roller 

Quick Detail:

Machine frame: 75-100mm

Model No. : YTB-6

Max speed: 100m/min

Plate Material: resin plate or rubber

Color& page: Multi-color printing press

Anilox roller:steel or ceramic anilox

Tension: Auto tension controller

Certificate: CE Certificate

Description:

1. The main features: 
1. Take it easy, accurate color, long life. 
2. Use motors, variable frequency speed control, saving electricity, small running fluctuations. 
3. Off printing roll automatic stop the ink-running motor, and up-printing roll automatic start running the ink. 
4. Use special diagonal-tooth gear, accurate printing size. 
5. Two sets of heating devices, including central heating and constant temperature control system for group control. 
6. Low-roller special steel processing, and special process, and plating thickness of 0.1mm protective layer of hard chromium. 
7 Alloy roll with hard oxidation, treating by dynamic balance, static balanced. 
8 With cold wind bellows, and can effectively prevent produce with ink adhesion after printing 
9. Print produce are clear and good arrangement quality. 
10. Bearing: NSK, Japan Brand, aluminum alloy roll 


2. Machine process: 
Unwinding unit-----auto tension controller for unwind ------EPC for correct position ---------Flexo printing -----------Heating and drying -------Rewinding Unit 


3. Machine different requires: 
1) machine width require: 
Standard: 600, 800, 1000, 1200, 1400, 1600mm 
Special: 1800, 2000, 2200, 2400m, 3200mm etc. 

2) machine speed require: 
Standard / normal speed: 10-70m/min 
Middle speed: 10-100m/min 
High speed: 10-120m/min 

3) machine printing material require: 
Standard: For plastic film, PE, PP, OPP, HDPE, LDPE, etc. And 30-150gsm paper 
Standard 2: Only for paper, 20-400gsm 
Standard 3: Only for non woven material 
Special: For alumnium foil, pp woven bag etc. 

Specifications:

Our printing effect: