Rapid Thermal Processing High Temperature Lab Drying Oven

Equipment function and Feature:

1. PID microcomputer automatic calculation intelligent temperature control table

PV/SV display at the same time

The required temperature can be freely set according to the individual's will within the allowable range of the machine temperature

Its temperature control can be ensured by the PID parameter setting in the table.

Accuracy can also be calculated by the system itself to calculate the appropriate temperature control parameters

While the temperature control table can set the 30-stage humidification program to control the heating rate (average humidity, nonlinear no-load).

2. Temperature input CA(K)TYPE temperature sensor, output is 12V

3. The current controller adopts the imported thyristor solid state relay (SSR) with no contact and no spark phenomenon, which maintains the high stability of the current and automatically adjusts the output ratio through the temperature controller signal.

4. Timer:

Electronic digital display, timed automatic temperature control, temperature to time, time to cut off power supply (when the timing switch points to the open position, the actual temperature on the temperature control table - PV value reaches the set temperature - SV value When the timer reaches the set time, the machine's heating, motor power and alarm prompts are cut off, only the display power supply and power supply of the control instrument are kept and the cooling speed is accelerated, thus ensuring The time accuracy of the work saves the loss of power, and it is convenient to observe whether the temperature inside the box is normal when the work is completed.

5. Structural design features: outer box cold-rolled plate baking paint + insulation cotton + inner box stainless steel plate, and this structure is also adopted on the door of the box, the tempered glass of the observation window is thickened, effectively preventing the damage of the box caused by the possible explosion. force;

6. Cold handle door lock: The door handle is equipped with a cold handle door lock, which is stable in structure and strong and reliable;

7. With over temperature protection, overload automatic power off system, high temperature resistant long shaft motor and wind wheel

Technical Parameter