| Function | Sine wave (half wave/full wave), frequency modulation, frequency
sweep, programmable, frequency multiplication, logarithm,
amplitude, maximum acceleration, time control, 485 communication
interface, simple
acceleration, simple fixed amplitude; |
| Vibration table size | L500×W500×H1 0mm and L500×W500×H200mm, there are 25 10mm
threaded holes on the top and 4 about 7cm hooks on each of the four
sides. |
| Direction of vibration | Vertical (Y) axis, horizontal (X) (Z) axis |
| Maximum test load | 0～100Kg/maximum excitation force in the range of 2000Kgf |
| FM function | Any adjustment of 1 ~ 600Hz, in the frequency range, any frequency
can not exceed one of the two items (maximum acceleration <20G
and maximum
amplitude <5mm) |
| Weep function | Arbitrarily adjust 1~600Hz, (upper band/lower band/time range) can
be set
to true standard back and forth frequency sweep |
| Programmable function | Arbitrarily adjust 1~600Hz, each segment of 1~15 can be set
arbitrarily
(frequency/time) to cycle |
| Multiplier function | Arbitrarily adjust 1 to 600 Hz, 1 to 15 segments are multiplied by
1) low to
high frequency; 2) high to low frequency; 3) low to high and then
low frequency / recyclable |
| Logarithmic function | 1) Down to up frequency; 2) Up to down frequency; 3) Down to up to
down
frequency - 3 modes logarithm/recyclable |
| Vibration machine power | 2.2kw |
| Amplitude | Arbitrarily adjust the amplitude from 0 to 5mm, no scale, no
display, no
adjustment, by frequency calculation |
| Maximum acceleration | Arbitrarily adjust the maximum acceleration 0~20G (200m/s2), no
scale, no
display, no adjustment, by frequency calculation |
| Vibration waveform | Sine wave (half wave / full wave) / maximum sine wave excitation
force
2000kgf |
| Time control | Can be set at any time (unit: second) |
