Double Box Structure IEC62133 Battery Testing Equipment / Battery Explosion Proof Test Chamber

Product name: Battery Explosion Proof Test Chamber

Model number: GX-FB-200

Equipment description

The battery explosion-proof box is mainly used for over-charging and discharging of the battery. In the charge-discharge test, the battery is placed in an explosion-proof box and externally charged and discharged tester.

Specifications

Each test box size: 500*500*500mm (length * width * height), a total of two test boxes;

Material: Outer box: 1.5mm thick cold rolled sheet and treated with baking finish,

Inner box: SUS#201 stainless steel. Thickness 1.0mm;

Single door, double door, inner box door is made of stainless steel, and silicone fastening bar is added, and there is a observation window at front of test chamber;

The door is connected to the box by a strong hinge, and the explosion-proof cold handle door lock;

The inside of the test box is affixed with Teflon tape to prevent corrosion, insulation, flame retardant and easy to clean;

With a circular wire hole on the left side of each box, the diameter is φ 50mm, which is convenient for testing the connection line feed through; (the number and direction of test holes can be specified)

Each layer has a separate test panel to control the exhaust in each test chamber, and the exhaust fan in the box can be opened to exhaust smoke during the test;

Each side of the box is equipped with an exhaust fan (φ 120mm) and an exhaust duct, which can be connected to the laboratory powerful exhaust fan;

Each layer of the cabinet is equipped with a lighting device to facilitate observation of the sample.

There is a thermal insulation design between each layer to avoid mutual influence testing.

Equipment volume: 700*600*1350mm (length * width * height)