USB2.0/3.0 Capsule Slip Ring Intearfacing Computers Electronic Devices Applied

USB2.0 USB3.0 Capsule Slip Ring for Intearfacing Computers Electronic Devices

USB slip ring, specially designed USB signal.USB1.0, USB2.0, and USB3.0 for transmitting signals.With stable transmission, no packet loss, no rope code, the return loss is small, the advangage below:

1.standard and on stock

2.Color-coded lead wires

3.Very low electric noise

4.Anti-jamming ,very low cost

5.Broadband:ethernet ( 1000 BaseT)

Quick Details:
 

USB2.0 USB3.0 Capsule Slip Ring for Intearfacing Computers Electronic Devices

Slip ring is an electromechanical device that allows the transmission of power and electrical signals from a stationary to a rotating structure. Also called a rotary electrical joint, collector or electric swivel, a slip ring can be used in any electromechanical system that requires unrestrained, intermittent or continuous rotation while transmitting power and / or data. It can improve mechanical performance, simplify system operation and eliminate damage-prone wires dangling from movable joints.

HD-SDI HD video slip ring signal transmission is suitable for hd-sdi HD video signal transmission of 1080P, 1080I and other hd-sdi signals. The transmission rate can reach 3Gbps/3GHz or higher.This product contains a high frequency signal channel and 8 or 12 road conventional signal channel, the high frequency signal is 50 Ω characteristic impedance rf coaxial structure, with a MMCX connectors (other specified connectors can transfer, wire specifications RG178, RG316, RG174 optional);Conventional signal channels can be used for power supply, control signal or other low-frequency signal transmission.Moreover, different electrical channel combinations (video, control, sensing, power supply, Ethernet, etc.) can be provided to adopt the leading domestic military-grade high standard surface treatment technology, gold to gold contact points, ensuring extremely low contact resistance and ultra-long work.

USB2.0 USB3.0 Capsule Slip Ring for Intearfacing Computers Electronic Devices

Description:

The CS series capsule slip ring is a standard and off-the-shelf unit that uses gold contacts on the rotary interface. Color-coded lead wires are used on both the stator and rotor for simplifying electrical connections.

The CS022-3P10-5S it using a 90° V-groove ring design for each ring and provides smoother running, lower torque and lower electrical noise than competitor slip rings.

 
Benefits:

• Transfers control and data signals
• Fiber brush technology provides maintenance-free operation (no lubrication required)
• Modular design meets special requirements through off-the-shelf manufacturing techniques
• Customized configurations for your application
• Quick shippments

 Dimensions:
 

Model Explanation:
 

USB2.0 USB3.0 Capsule Slip Ring for Intearfacing Computers Electronic Devices

Specifications:

• Contact Material

  Gold alloy brush,Gold plated rings

• Current Rating

  2A, per ring, maximum

• Number of Circuits

  12

• Operating Speed

  250 rpm* continuous

• Housing Material

  Engineering Plastics

• Lead Wire

  UL Teflon® Awg28,color-coded, silver-plated

• Lead Lengths

  250mm

• Voltage

  210 VDC / 240 VAC

• Operating Temp.

  -40°C to 80°C

• Torque

  Approx. ≤0.39 g·m (for reference )

• Dielectric Strength

  ≥600V@50Hz between each circuit

• Insulation Resistance

  600MΩ@ 300VDC

• Noise

  15 milliohms maximum tested @ 6 VDC, 40 milliamps when running @ 5 - 15 rpm

• Resistance to pull

  Radial 2KG,Axial 0.5KG

• Protection

  IP51

Applications:

• CCTV Monitoring System.
• Electrical test equipment.
• Medical equipment.
• Rotary table
• Robotics
• Laboratory equipment
• Manufacturing and process control equipment

Contact US

Jarch main products:

1. Fiber optic rotary joint series

2. Through bore slip ring series

3. Electro optical slip ring series

4. Hybrid slip ring series

5. Pneumatic rotary joint series

6. Hydraulic rotary union series

7. Capsule slip ring series

8. Pancake slip ring series

9. High current slip ring seriels

10.High speed slip ring series

11.Thermocouple slip ring series

12.Miniature slip ring series

13.Wind turbine slip ring series

14.Ethernet slip ring series

15.Explosion proof slip ring series

16.Mercury slip ring series

Why to choose JARCH slip ring?

JARCH Company is a professional slip ring manufacturer in Shenzhen, China. JARCH has become one of the best-known Chinese brands in the world for high quality slip rings and first-rate services. Since we were founded in 1998, we have been committed to innovating, developing and manufacturing high quality slip rings and providing perfect rotation solutions for customers around the world.
With more than 19 years' experience in the field, JARCH has established long term business relationships with transnational corporations, research institutes, military-industry departments, famous universities as well as a lot of companies in various industries at home and abroad.
We specialize in custom slip rings solutions tailored to meet your project's requirements for performance, testing, qualification and delivery. Our teams understand the importance of comprehensive project planning ensuring your project's success.

Can't find the right slip rings solution?

At JARCH Company, we strive to meet the needs of our customers. If an assembly from our standard model does not fit your requirements, our design team will work with you to design a slip ring assembly that will meet your company's exact needs. With over 19 years of experience JARCH has amassed over 10,000 drawings, thousands of custom slip ring designs and experiences supporting customers worldwide.

FAQ