Electronic Automatic Plastic Testing Equipment / Melt Flow Index Tester

Electronic Melt Flow Index Tester , Automatic Plastic Testing Equipment

Specifications

Melt Flow testing machine
1.Melt Flow Indexer is used to determine melt-mass flow rate .
2.High quality,melt indexer
3.Direct factory

1.Melt Flow testing for PP and PE

1.Melt index tester is used to determine melt-mass flow rate (MFR).
2.High quality,melt indexer

2.Principle:

Thermoplastic melt flow rate (melt index) is plastic at a temperature and load, the melt every 10 minutes through a standard capillary die quality or melt volume, with MFR (MI) or the MVR value, which can distinguish thermoplastic adhesive in the molten state flow characteristics. For thermoplastics and chemical fiber raw materials, quality assurance of products and other products of great significance.

3.According to the standard:

Electronic MFR Plastic Melt Flow Index Testing Instrument reference standards: ISO 1133, ASTM D1238, JIS-K72A, GB/T3682, JB/T5456, JJG 878

4.The main technical parameters:

Measuring range :0.1-800 .00g/10min (MFR) 0.1-800.00 cm3/10min (MVR)

Temperature range: room temperature -450 ℃

Temperature accuracy: ± 0.5 ℃

Timing accuracy: 0.1S

Displacement accuracy: 0.01mm

Load: full load

Material cutting modes: manual, time control, automatic

Barrel diameter: 9.550mm ± 0.025mm

Barrel Length: 160mm

Die: made of tungsten carbide, length: 8.000mm ± 0.025mm diameter: 2.095mm ± 0.005mm

Power: 0.45KW Power supply: AC220V, 50Hz

Instrument Size: 400mm × 500mm × 600mm

Instrument Weight: 65Kg

Specification:

Pictures: