Stainless Steel Wire 304 SS Thermal Spray Wire
Product Introduction:
304 stainless steel wire sprcifically designed for arc spraying. It
produces a dense, well-bonded coating with excellent
machinability and wear and corrosion resistance. 304 stainless
steel is widely used for machine element repair, dimensional
restoration and wear resistance applications. It has relatively
high shrink characteristics and should not be used for coatings
over 0.075 inches thick.
Surface Preparation:
Surface should be clean, white metal, with no oxides(rust), dirt,
grease, or oil on the surface to be coated. Note: It is best not to
handle surfaces after cleaning.
Recommended methodof preparation is to grit blast with 24 mesh
aluminum oxide, rough grind, or rough machine in a lathe.
Chemical Compositin:
| Cr | Ni | Mn | Si | Fe |
| 19.0 | 9.3 | 2.0 | 1.0 | Bal. |
Typical Characteristics:
| Typical Hardness | HRB 95-100 |
| Bond Strength | 4650 psi |
| Deposit Rate | 10 lbs/hr/100A |
| Deposit Efficiency | 75% |
