Large Stocks Thermal Spray Tafa 24ca Wire (0Cr25Al5)
(Common Name:0Cr25Al5,Aluchrom-O)
0Cr25Al5 is a iron-chromium-aluminium alloy (FeCrAl alloy) characterized
by high resistance, low coefficient of electric resistance, high
operating temperature, good corrosion resistance under high
temperature.It is suitable for use at temperatures up to 1250°C.
Typical applications for 0Cr25Al5 are used in electric ceramic cooktop,industrial furnace,heaters.Normal composition%C | P | S | Mn | Si | Cr | Ni | Al | Fe | Other | Max | 0.06 | 0.025 | 0.025 | 0.70 | Max 0.60 | 23.0~26.0 | Max 0.60 | 4.5~6.5 | Bal. | - |
Typical Mechanical properties(1.0mm)Yield strength | Tensile Strength | Elongation | Mpa | Mpa | % | 500 | 700 | 23 |
Typical Physical propertiesDensity (g/cm3) | 7.10 | Electrical resistivity at 20ºC(ohm mm2/m) | 1.42 | Conductivity coefficient at 20ºC (WmK) | 13 |
Coefficient of thermal expansion | Temperature | Coefficient of Thermal Expansion x10-6/ºC | 20 ºC- 1000ºC | 15 |
Specific heat capacity | Temperature | 20ºC | J/gK | 0.46 |
Melting point (ºC) | 1500 | Max continuous operating temperature in air (ºC) | 1250 | Magnetic properties | magnetic |
Temperature Factor of Electrical Resistivity20ºC | 100ºC | 200ºC | 300ºC | 400ºC | 500ºC | 600ºC | 700ºC | 800ºC | 900ºC | 1000ºC | 1100ºC | 1200ºC | 1300ºC | 1 | 1.002 | 1.005 | 1.008 | 1.013 | 1.021 | 1.030 | 1.038 | 1.040 | 1.042 | 1.044 | 1.046 | 1.047 | |
Style of supplyAlloys Name | Type | Dimension | | 0Cr25Al5W | Wire | D=0.03mm~8mm | | 0Cr25Al5R | Ribbon | W=0.4~40 | T=0.03~2.9mm | 0Cr25Al5S | Strip | W=8~250mm | T=0.1~3.0 | 0Cr25Al5F | Foil | W=6~120mm | T=0.003~0.1 | 0Cr25Al5B | Bar | Dia=8~100mm | L=50~1000 |
| | |
| | |
Mechanical Properties of Ni95Al5 thermal spray wireCoating Hardness | HRB 75 |
Bonding Strength | 68.95 N/mm2 |
Deposit Rate | 10 lbs/hr/100A |
Condition | Solid Wire |
Normal Features of Ni95Al5 thermal spray wire:
(1)High mechanical properties
(2)High corrosion resistance
(3)High temperature coefficient of electrical resistance