Annealed Corrosion Resistant NiCr2MnSi Spark Plug Wire

NiCr2MnSi Nickel Based Alloy Wire Good Corrision Resistant Spark Plug Wire

General Information:

2.4146
NiCr2MnSi
17741,17753

Good corrosion resistance and cold workablity.

Central and ground electrodes of spark plugs. Special designs and special alloys to customer specification.

Delivery status and supply state of furnace resistance alloy heating ribbon
Wire and plate with the looseness or oxidation colour soft modal supply.
Strip except special requirements outside, general with after annealing oxidation colour supply.
The flat silk thread and protecting gas to light after annealing soft modal supply.
2, product packaging of furnace resistance alloy heating ribbon
Wire or strips to pack cloth bandaged volumes supply.
Thread and flat silk, axis encapsulate supply.
3, export products and users have special requirement, negotiation.
Note
1, when the design should be based on the power wiring method, reasonable surface load, the correct choice of silk diameter,
2, before installation coping furnace thorough examination, cleared ferritic, "carbon, and the electric stove contact risks to avoid short circuit, in case caused furnace silk breakdown,
3, when installation should press design wiring method properly connected;
4, in use before should check the sensitivity of the temperature control system, in case of failure, cause temperature burnt.

The material NiCr2MnSi is not part of any material group. The steel material "NiCr2MnSi" has one alternative name. Material "NiCr2MnSi" is made of Carbon, Chrome, Copper, Iron, Manganese, Nickel, Silicon, Sulfur and Titanium.

Commonly used by spark plug manufacturers in addition to chromium, manganese and silicon, which makes spark plug electrode products highly resistant to oxidation, corrosion and erosion at high temperatures caused by combustion gases. These alloys are also characterized by exceptional electric resistivity, electronic emission and the level of thermal conductibility required for its utilization as spark plug electrodes. It is important to point out that these special alloys are produced in accordance with specifications required for guarantee of mechanical strength combined with ductility, which facilitate adjustments for the opening of electrodes by bending components. NiCr2MnSi main characteristics:

• Resistant to oxidation and corrosion caused by combustion gases
• Good characteristics of cold fabrication
• Excellent electronic emission