Analysis and testing cup

1. Graphic diagnosis.
2. Metabolic diagnosis.
3. Optical distribution index.
4. Etalons according to I.S.E.
5. Nuclei of sensitivity and systemic hyperreactivity.

1. Diagnosis ex juvantibus.
2. Trend adjustments.
3. Entropy analysis system.
4. Analysis system by multifactorial.
5. Model of etalon-object.
6. Diagnosis by vegetative teas.
7. Presence of antigens.
8. Multidimensional analysis (Three-dimensional).

WHAT BENEFITS WOULD YOU BUY A HUNTER 4025 18D  

EXPLAINING SOME EXAMPLES:

Researches

In the Ultra-structure mode histological, cytological and molecular researches are carried out. Moving the cursor over organ’s projection, you select the structure

of your interest, which image and name appear on the right, and the cursor becomes a cross-hair. Clicking the left mouse button starts researches of a respective structure at the preset point. After the researches are completed an icon emerges on the organ’s image, which can be unfolded by clicking it with the left mouse button. On one and the same organ you can make several researches of ultra-structures with different localizations, gradually passing from microscopic sections to cytological preparation and molecular structures.

Types of researches:

Express – enables investigations to be carried out on the full topographic sections without details.
Standard – enables the study of individual histological or genetic structures to be carried out, provided they show pathological changes.
Detail -enables an evaluation to be made of the structure of all body tissues on histological, cytological or genetic levels, which may be important to high quality scientific research.

The form “Researches”

allows to carry out computer nonlinear analysis in the mode of a programmed and (or) individual selection of the organs intended for researches. The main feature of “Metapatia-GR Hunter” software is “3D scan” function, which allows automatically localize the nidus where tumor and hereditary diseases appeared, find out the reason of appearance on genome level, passing one by one histological, cytological preparations, chromosomes and going deeper to the level of DNA molecule parts.

You can turn on this mode by pressing “3D scan” button. If this button is not pressed, researches will be carried out in normal mode, without localizing of nidus where pathology appeared. During the research the most grave changes in tissues shown on macrocuts are revealed, then search and research of histological cuts of these tissues in areas of the most significant pathological changes are carried out. Then, after histological cut research, the search for the most significantly changed cells is carried out, which examined to reveal changes in cell structures. After that, the algorithm of the search goes to the level of chromosomes, to estimate the changes in single chromosomes, then it goes deeper to the level of DNA molecule research. During the research in “3D scan” mode the estimation of topological picture and metastasis is carried out. Additional researches fulfilled to search metastases into other organs. The research is done in automatic mode; user can observe it and stop at any moment.

The button is multi-purpose for starting of the research, estimation of micro- and additionally placed points, nidus estimation and making of preparation. The name of the button is changed according to fulfilled function.

The button “Analysis” allows carrying out a routine analysis based on the results of the researches.
The button “Ectomy” allows to preclude an attempt to examine patient’s resected organs.

The switch-button “Programmed/individual choice“; when it is pressed allows an automatic selection of a profound detailed researches of anatomical, histological and cytological structures depending upon the presence of frank changes in complete anatomical sections of the body; when the button is not pressed the physician can solely select for researches the organs belonging to one of the anatomical systems, by putting or removing tags on the organ’s picture, in the right part of the screen on the split bar with right mouse button.

The button “Make preparation” – the preparation is made automatically for pictures, in which the nidi were evaluated. After clicking this button the operator should select the organs subject to preparation making and press the button “Start preparation making”.

In organs catalogue there are two modes of representation: -graphical – organs shown as pictures; -textual – shown names of organs. You can switch modes by pressing “Textual mode” button. In textual mode “Sort” and “Cancel/Restore chosen” buttons are available. “Sort” button allows change modes of organs list sorting. There are four modes: -According to systems. Organs sorted according to systems: main catalogue, digestive system, respiratory system, urogenital system, cardiovascular system, blood and lymph, endocrine system, nervous system, sensors and musculoskeletal system.

-In alphabetical order.
-According to isolines. Positions of isolines are compared. Organs with higher positioned S-graph shown in the beginning of the list.

-According to points. In the beginning of the line shown organs with more pronounced changes in estimation points.

The ”Options button” shows additional buttons panel.

Etalon testing

Every organ and every cell has its own specific and distinctive oscillation. The oscillations are stored in the computer memory and can be displayed on the screen as a graph, which represents the condition of the information exchange between an organ or tissue and the environment. Every pathology has its own individual and distinctive graph. The computer memory also stores a very large number of pathological processes taking into account rate of evidence, age, sex and other variations.

After frequency characteristics are read from tissue, the apparatus compares spectral similarity with stored processes (healthy tissue, pathological tissue, infection agents) and then selects the closest pathological process or tendencies to its appearance. By this method of analysis it is possible to trace the condition of the red (S) input signal and the condition of the blue (N) output signal, which are displayed as graphs on the screen. From the shape of the graph it is possible to determine which of the reference

BIOCHEMICAL HOMEOSTASIS

This program carries out a qualitative evaluation of the main biochemical factors by evaluating the wave functions of body tissues. This evaluation is carried out using the NLS – analysis mode. Note that the lowest values of enzyme (hormone) concentration within the normal bounds correspond to 2 in the graph. Whereas, the highest values within the normal bounds correspond to 6.

The values of the factors equal to 3, 4 or 5 correspond to the ‘mode’ of the factor, and the extreme values 1 and 7 characterize biochemical factors beyond the physiological norms, lower and higher respectively. The standard rules for making biochemical analysis using conventional clinical methods should be used when analyzing the computer results.

PATOMORPHOLOGY

This shows a list of the etalons of destructive processes. This section holds basic patomorphologic conditions peculiar to single tissues of an organism. Every destructive process has a distinctive graph.

MICROORGANISMS AND HELMINTHS

In this section are recorded the major characteristics of infection agents: – bacteria, viruses, mycoplasma, rickettsias, fungi and helminths. This presents changes in the form of high peaks of dissociation within the frequency range representing the natural frequencies of the tissue.

For example Opisthorhis felineus has a high dissociation in frequency – 4.9Hz – parenchymatous liver tissue and bileexcreting tissue. These tissues are known to be largely affected by trematodes Opisthorhis felineus-
– opisthorchiasis.

Recorded in the group ALLOPATHY is the wave characteristics of the principal chemical (synthetic) medicinal preparations used in conventional medicine.

HOMEOPATHY

In this group the wave characteristics of homeopathic preparations are recorded.

PHYTOTHERAPY

In this group the wave characteristics of medicinal plants growing in the Midwest of Russia are recorded.

NUTRICEUTICALS

In this group the wave characteristics of biologically active supplements (BAS) produced by major Russian and foreign companies who produce and supply nutritional supplements are recorded.

ALLERGENS

In this group wave characteristics of food, domestic, animal, vegetable, and industrial allergens of all kinds are recorded.

FOOD

In this group wave characteristics of food separated into groups (meat, fish, dairy, vegetables, fruits, oil, drinks, spices, etc.) are recorded. Dietetic foodstuff, due to their therapeutic action recommended to use, highlighted in green color. Not recommended foodstuff highlighted in black, neutral – in orange.
 

LITHOTHERAPY

In the program spectral characteristics of gems and minerals are represented together with description of therapeutic action. By pressing “Picture” button you can see pictures of more than 200 minerals. Program can choose a mineral for a patient, suitable according to spectral characteristics for permanent possession or for specific diseases treatment. Using specific spectral characteristics of minerals, modulated and radiated by the apparatus, you can treat acute and chronic diseases. To start this mode press “Lithotherapy” button.

Natural frequencies of the tissues within the following standard frequency band:

– 1.8 skeletal system;
– 2.6 coarse connective tissue, joints, and cardiac valves;
– 2.6 – 3.4 loose connective tissue, striated muscular, and cardiac muscle;

– 3.4 unstriated muscular tissue.

– 4.2 tessellated epithelium of the digestive tract;
– 4.9 stratifies squamous and columnar epithelia. Parenchymatous liver tissue and tissue of the biliary tract;

– 4.9 – 5.8 kidney tissue epithelium and reproductive organs;
– 5.8 lymphoid ring of the pharynx, upper section of the respiratory
tract, lymphatic system, spleen, ovaries, and prostrate;
– 6.6 peripheral nervous system, bronchus epithelium, adrenals, and thyroid;

– 7.4 central sections of sensory analysers except the optic ones, and sub cortical structures of the brain, pons cerebelli; cerebellum, limbic system and lungs parenchyma;
– 8.2 retina, optic nerve, cerebral cortex.

By pressing “Display” button following drop list appears: “Object” – graph lines of lilac and orange color, display a graph of the examined biological object, organ or tissue plotted in the course of the investigation.
“Etalon” – thin graph lines of red and blue colors, represent a graph of the chosen reference process.
“Spectrum” – pressing this button displays an enlarged graph.

“Optimum” – a yellow graph shows normal (Gaussian) distribution of the signal in standard frequency.
“Model” – thick graph lines of red and blue colors, show a graph of the virtual model.
“Invert” – enables the polarity of the graph to be inverted.
When “Display” button is pressed, picture of microorganisms or minerals is shown. The button ‘Clear’, above the list of etalons, removes the dispersion analysis from all groups of etalons.

CLOSING SOME CONCEPTS OF ANALYSIS

The buttons under the organ’s picture can be either depressed or pushed up; in the depressed condition organ’s respective elements are depicted. “Text” – allows acquiring information on particular fragments in the picture. To this effect you have to press the “Text” key, which will display icons in the picture, shaped as green daggers. To read the text, stop the mouse cursor on the dagger, and then a message will appear in the square next to it. Left-clicking the dagger se nds the message to print.

To this effect put ticks in squares to the left from the text of the message, in the unfolded form. In this mode there is a possibility to quick-cross for examining the picture connected with this particular research with the help of icons.

To this effect press the “Icons” key, this will display icons in the picture. In order to see what a picture a particular icon can unfold, you need to stop the mouse cursor on the icon, then the picture name will appear in a square next to it, and in place of the graph there will be its image with icons. The color square around the icon denotes the functional condition of the organ.

The color of the square corresponds to the colors described in “Program setup” section; clicking an icon unfolds the respective organ for researches.