Custom Sound Proofing Operable Exhibition High Partition Wall 65mm Thickness

Factory Custom Good Quality Sound Proofing Operable Exhibition High Partition Wall

Features:

Movable, top hung system without the need for a floor track
 

Retractable top and bottom seals ensure effortless movement of panels
 

Combines elegance with robust construction
 

Concealed or exposed panel edge profiles
 

Numerous panel stacking options for complete flexibility
 

Sealed for life roller assemblies provide smooth and silent movement
 

Various levels of sound reduction

Bunge Operable Wall Systems-Technical Information

2,FIXING

1)siz of wall: all panels should be installed in accordance with the manufacturers recommendations.

2)cutting: all necessary hardware and accessories for a complete job installation are to be furnished by the contractor.

3)install the acoustic panels: the installation of acoustic panels should be carried out in a sequence from the left to the right, from upside to downside, the panels are cut to fit on site, traditional woodworking tools are suitable for cutting the panels, if panels are cut using a fine tooth table saw the panels should be cut face up to avoid scratching and at a much slower speed to avoid any tearout or chipping.

4)fix on keel:

1)wooden keel fixing using nails, staples or screws into prefixed timber battens on the walls via the tongue and groove joint.

2)also can fixing by: Light Steel Keel(size: 18*26*3000mm, use clip(size: 45*38mm) to fix.(needs 2.1m of keel and 17 clips per m2)

Common Applications:

1.studios, recording rooms, listening rooms, rehearsal rooms and more professinally interspace timbre projects.

2.theaters, indoor gymnasiums, discos, KTV rooms and more performance and entertainment location.

3.meeting rooms, offices, halls, hotels and more sound absorption and secrecy projects.

4.air-port, railways, bus-stops, manufactories, workshops and more noise reduction projects.